Forums » Support

Back To Topics

reversed servo

    • 5 posts
    February 17, 2016 10:34 AM CET

    I already done that, working ok :)

  • T P
    • 6 posts
    February 17, 2016 3:03 AM CET

    Hey, mine was wrong as well, just choose Invert direction in the settings for that port

    • 5 posts
    February 8, 2016 9:33 AM CET

    I didn't use any instruction, I was assuming that conecting 4 cables is no-brainer.

    I saw in app instruction that there should be possible to invert channels but

    1. I assumed that default volvo profile should had this done

    2. I coudn't find how to edit downloaded profile, now I see that this is possible, no idea why I coudn't find this earlier

    I will test this when will be at home


    This post was edited by Szymon Z at February 8, 2016 9:33 AM CET
    • 99 posts
    February 8, 2016 7:11 AM CET

    There is an inverter on each channel of the SBrick, that you can set when you configure your profile in the app.

  • T P
    • 6 posts
    February 7, 2016 10:40 PM CET

    hmm, what instructions did you use?

    • 5 posts
    February 7, 2016 1:59 PM CET

    I just got my sbrick, connected it to my Volvo 42030, and... something gone wrong. Everything is working as designed except servo which is reversed. I mean when doing joystick right, Volvo is turning left and vice versa. How this can be possible? There is no polarity on motors, also you can't connect power reversed and polarity on battery box doesn't reverse anything. I have no idea what might be wrong. Any suggestions?

    I am using Samsung Galaxy S4 Mini, Sbrick 4.8, App 2.0.1, Volvo profile 2.3