Forums » Support

• Lénárd Pásztor

  

  • 340 posts
   

  February 1, 2021 12:23 PM CET

  That can be a problem because some M motors has wrong capacitators inside, they also not work with the IR remove v1.

  We try to help them with modification with the SBrick's firmware, we will publish an update when it will ready.

  Before you can try to use another M motors or L motors instead.

• Greg

  

  • 2 posts
   

  January 27, 2021 11:15 PM CET

  Yes!

• Lénárd Pásztor

  

  • 340 posts
   

  January 27, 2021 4:03 PM CET

  These are M motors?

• Greg

  

  • 2 posts
   

  January 26, 2021 10:36 PM CET

  I have built Lucio's MKII moc, all functions work except rear stabilizers. Sorry probably a noob question, first time incorporating SBrick to my builds.

   

  If I unstack the leads, and hook up one at a time the motors for the rear stabilizers work as expected, but as soon as I hook both together it stops firing, just whines. 

   

  Pictured is SBrick2 - which is powered in series from SBrick 1. Is this a low voltage issue due to the series? I have reversed the stacked order, and tried on other SB2 ports with the same result.