Updates

• 
  Alexandr Lukinov replied to a topic in the forum Suggestions:

  Nice idea, just add one more layer with height of 1 lego tile and you will have nice tracking for all wires and stable contatct.
  I was thinking about rotation of top sockets (A and C, as I remeber) on 180 degress to aviod the same sitiation with gap and...  moreNice idea, just add one more layer with height of 1 lego tile and you will have nice tracking for all wires and stable contatct.
  I was thinking about rotation of top sockets (A and C, as I remeber) on 180 degress to aviod the same sitiation with gap and tiles and also provide posibility to use stacks of wire connectors. Currently B and D sockets sould fit only one connector at once due to heigh limitation. There is a lot of pro and contra for it, so I guees that T P's idea is really better.  

  • February 27, 2016
• 
  Alexandr Lukinov replied to a topic in the forum Suggestions:

  Lénárd Pásztor said:
  Hi,
  You can link the controls in the app. If you have a slider with CH name x and a button with the shame CH (Channel name) then it will...  moreLénárd Pásztor said:
  Hi,
  You can link the controls in the app. If you have a slider with CH name x and a button with the shame CH (Channel name) then it will works.
  
   
  Just double checked and result is negative, unfortunatelly. I wish we tlak aboout teh same things, so let me exmplain the sitiation.
  Probably it's just my wrong opinion, so please correct me then.
  I made a slider with "auto reset = no" setting (to keep the given value) and added button with "auto reset = yes", both with the same name of chanel. Then I did follwing:
   1. Moved the slider to ~0.85 position (close to uppper limit) and leaved it. Motor continued to rotate with desired speed. Slider also remained at a given position. Everyting fine so far.
  2. Then I pressed and hold for a seconds (just to validate result) the button. Motor rotated with maximum speed and then stopped. Button flased while I keept it pressed and then dimmed. But slider still remained at previuos position despite of thr...    less

  • January 31, 2016
• 
  Alexandr Lukinov replied to a topic in the forum Suggestions:

  Jason Waldrip said:
  Link channel values. For example, if I have a slider on the drive channel and a stop button on the drive channel that sets the value to zero, the slider should also reset to...  moreJason Waldrip said:
  Link channel values. For example, if I have a slider on the drive channel and a stop button on the drive channel that sets the value to zero, the slider should also reset to zero.
  
   
  +1, agreed.
  Just configured the profile with set of controls and it was suprise for me that button which I confirgured to =0 didn't reset other contols linked to the same chanel (sliders). It's really should be done, but please make adttional option to skip/ignore it also too.  

  • January 22, 2016
• 
  Alexandr Lukinov has just signed up. Say hello!

  • January 20, 2016