Just saw the new app released from the Apple App Store. I downloaded it an updated the firmware on the SBrick Plus. This new update does correct the servo wiggle but I do find that the steering is not as proportional (smooth) as it was with the older SBrick. I am interested to hear what other folks say.
[blockquote]Balint Mezei said:
[blockquote]Marcel Görner said: Same here for me with sBrick Plus. Only value -1;0;1 are ok every other value is resulting in an uncontrollable "wiggle". Was still checking if this is normal or a faulty part. Did tested now with two sbrick plus and three servo. All the same behavior. Did also test different profiles joystick and slider controls, no difference.[/blockquote]
Thank you for the report, we will check this!
Soon we will get back to you,
Regards,
Balint
Sbrick Team
[/blockquote]
Hey. Any news? It's very frustrating for us as we cant use Sbrick normally :(
[blockquote]Marcel Görner said: Same here for me with sBrick Plus. Only value -1;0;1 are ok every other value is resulting in an uncontrollable "wiggle". Was still checking if this is normal or a faulty part. Did tested now with two sbrick plus and three servo. All the same behavior. Did also test different profiles joystick and slider controls, no difference.[/blockquote]
Thank you for the report, we will check this!
Soon we will get back to you,
Regards,
Balint
Sbrick Team
[blockquote]Balint Mezei said:
Thank you for the information,
We will check this problem out.
We ask for some patience,
Best wishes,
Balint
SBrick Team
[/blockquote]
Here is the video so you will see it for your own eyes:
https://www.youtube.com/watch?v=o4RM9OA4_1k
[blockquote]Michal Blobl said:
[blockquote]Balint Mezei said:
Hello Guys,
Could you check out your applications version number?
Please check in app store, or google play whether you have the latest one.
Also the SBricks firmware must be the newest, but as you mentioned it is all right.
If the application is also the newest, please contact us at info@sbrick.com
Best wishes,
Balint
SBrick Team
[/blockquote]
iOS app version 4.2.1 (newest)
Sbrick hardware version 11
Sbrick firmware version 17
We can contact here as there may be more users like us which has got the problem with servo.
Any more sugestions?
[/blockquote]
Thank you for the information,
We will check this problem out.
We ask for some patience,
Best wishes,
Balint
SBrick Team
[blockquote]Balint Mezei said:
Hello Guys,
Could you check out your applications version number?
Please check in app store, or google play whether you have the latest one.
Also the SBricks firmware must be the newest, but as you mentioned it is all right.
If the application is also the newest, please contact us at info@sbrick.com
Best wishes,
Balint
SBrick Team
[/blockquote]
iOS app version 4.2.1 (newest)
Sbrick hardware version 11
Sbrick firmware version 17
We can contact here as there may be more users like us which has got the problem with servo.
Any more sugestions?
Hello Guys,
Could you check out your applications version number?
Please check in app store, or google play whether you have the latest one.
Also the SBricks firmware must be the newest, but as you mentioned it is all right.
If the application is also the newest, please contact us at info@sbrick.com
Best wishes,
Balint
SBrick Team
Hi Michal,
I am having the same problem. I get a wiggle in my steering when not going full left or full right. I think the SBrick Plus is having problems with a stepper motor. The standard Sbrick works fine.
I checked my firmware and it says it is up to date.
We will see what SBrick says.
Marc
Connected sbrick plus to my new volvo loader and the only problem i have is that when i move my finger onto let's say half position between 0 and 1 then my servo motor keeps wiggling about that position, back and forth without any chance to stop.
Only having that on idle so my wheels are straight or dynamically moving it from 0 to maximum works almost ok. But any holding position in-between result in servo motor shaking.
Using ios10 on iphone SE. Sbrick plus is updated.
Any advices?