Updates

• 
  Viktor Onishchuk replied to a topic in the forum Support:

  It's a Very Good idea. Maybe only android-app make as open-source (also as android os)?
  We see for last several moths that sbrick team does not cope, does not time to release an android app. Especially an another app was released from other developers.

  • March 2, 2016
• 
  Viktor Onishchuk replied to a topic in the forum Support:

  Tamas Misik said:
  Viktor, thanks for the info. What happen if you don't pair your phone with the SBrick? It should works perfectly without pairing. 
  Without pairing - all dialogues open immediately, momentarily, but does not work anyone. I...  moreTamas Misik said:
  Viktor, thanks for the info. What happen if you don't pair your phone with the SBrick? It should works perfectly without pairing. 
  Without pairing - all dialogues open immediately, momentarily, but does not work anyone. I found this behaviour slightly strange. It's seems that application to do something but does not do it.
  If I perform pairing, then there's a slight delay (~ 1sec) in opening control dialogues, where SBrick stay disconnected, after this "disconnected" message is disappears, and I can work with SBrick properly. This 1-second "gap" before all control dialogues indicate that's all right. No slight delay - no control, slight delay exists - control work properly.  less

  • February 1, 2016
• 
  Viktor Onishchuk replied to a topic in the forum Support:

  Tamas Misik said:
  Viktor, what kind of device do you use?
  
  Here is...  moreTamas Misik said:
  Viktor, what kind of device do you use?
  
  Here is it:
  http://specsen.com/tablet-pc-tesla/tesla-gravity-7-0-octa/
   
  Tech specs on the link. If you needed more info, ask me.  

  • February 1, 2016
• 
  Viktor Onishchuk replied to a topic in the forum Support:

  It's very needed to add a some bluetooth autoreconnect function. Sbrick have lost connection very often. After this, it's needed to close app (thanks to "exit"), then open "Settings", go to "bluetooth", then switch off a bluetooth, then switch on, after...  moreIt's very needed to add a some bluetooth autoreconnect function. Sbrick have lost connection very often. After this, it's needed to close app (thanks to "exit"), then open "Settings", go to "bluetooth", then switch off a bluetooth, then switch on, after this click to SBrick to bluetooth pairing, then close settings, then run SBrick application, then go to dialogues and pray than there's no more gaps - ELSE these operations needed to perform again.  

  • February 1, 2016
• 
  Viktor Onishchuk replied to a topic in the forum Support:

  Marc Jaouen said:
  There's a check box at the end of the tutorial to say that you don't need to see it again...
  
  Heh... I never scroll this tutorial to the end, closed immediately. Question is removed.
  XX

  • January 29, 2016
• 
  Viktor Onishchuk replied to a topic in the forum Support:

  Yes, an "EXIT" is appears in app. (step by step, app is making more cosy).
  Next step - slightly bored "Tutorial", which appears every time where app is starting. Maybe make that tutorial apears only one time after app was installed? "Tutorial" was added...  moreYes, an "EXIT" is appears in app. (step by step, app is making more cosy).
  Next step - slightly bored "Tutorial", which appears every time where app is starting. Maybe make that tutorial apears only one time after app was installed? "Tutorial" was added to mainmenu, besides...  

  • January 28, 2016
• 
  Viktor Onishchuk replied to a topic in the forum Support:

  Please, make "Pairing" (some pictogram) and "Exit" (х cross) hotbuttons in app!

  • January 24, 2016
• 
  Viktor Onishchuk replied to a topic in the forum Support:

  Very big THANKS for a new version of app. It's working all, pad doesn't necessary to be reboot (there was a very stipid rule).
  I want to convey to request to make an EXIT button from mainmenu (not "logout", "exit"!). A can't exit from prog!

  • January 22, 2016
• 
  Viktor Onishchuk replied to a topic in the forum Support:

  I hope that we see a new beta version of app very soon, at least, ex. "sbrick_beta2.apk"
  Sbrick_beta.apk is working, but very unstable, connection is lose very often...

  • January 11, 2016
• 
  Viktor Onishchuk replied to a topic in the forum Support:

  I suppose that application lose control with bluetooth module and cannot return back this control again.
  Application must checking periodically a wireless connection and automatically re-initialize a bluetooth module when connection is lose.
  Maybe in...  moreI suppose that application lose control with bluetooth module and cannot return back this control again.
  Application must checking periodically a wireless connection and automatically re-initialize a bluetooth module when connection is lose.
  Maybe in first time - add a button to menu, for example, "reset bluetooth"?  

  • January 3, 2016
• 
  Viktor Onishchuk replied to a topic in the forum Support:

  I want that Sbrick is working properly. Why I bought it? To send back to seller? No, sure.
  What can I do? To testing a some other beta-version of app? I don't mind (sorry for bad english)

  • January 3, 2016
• 
  Viktor Onishchuk replied to a topic in the forum Support:

  Hi all! A recently times ago I bought a Sbrick controller (to Christmas, a week before).
  I have a chinese minipad Tesla Gravity 7.0 OCTA (Chuwi VX3)
  Technical specifications of device:
  - screen size: 7",...  moreHi all! A recently times ago I bought a Sbrick controller (to Christmas, a week before).
  I have a chinese minipad Tesla Gravity 7.0 OCTA (Chuwi VX3)
  Technical specifications of device:
  - screen size: 7", 1920x1200
  - processor: MTK6592, 1664 Mhz, 8 cores
  - graphics: Mali-450
  - memory: 16GB flash, 2GB ram
  - peripherals: all needed to modern pads (BT 4.0, WiFi, 2cams etc)
  - installed OS: Android 4.4.2 KitKat
  I hope that's all needed information about my pad. These pad is meet all requirements.
   
  I have install a Sbrick application from Android Play Market. BUT! Application does not work properly - where attempts to connect with SBrick. There is a sequence of my steps. Before these steps I've switch off an SBrick receiver and reboot a pad.
  1. I switch on an SBrick device. LED is light on.
  2. I run an Sbrick via red icon "S". SBrick application is rinning.
  3. Main menu appears (LOGIN, Home, My Creations, Market, Manage Bricks)
  4. I choose a "Manage Bricks". Via some seconds my device appears to string...    less

  • January 3, 2016
• 
  Viktor Onishchuk has just signed up. Say hello!

  • January 3, 2016