Updates

• 
  Makar V replied to a topic in the forum Support:

  Makar V said:
  Eduard Surovin said:
  Today I found out that 2 sequences mapped to same channel with Repeat set to On "fight" each other. I set first sequence to repeatedly set servo to 0, and second to set same servo to 1. when I activated both, servo was...  moreMakar V said:
  Eduard Surovin said:
  Today I found out that 2 sequences mapped to same channel with Repeat set to On "fight" each other. I set first sequence to repeatedly set servo to 0, and second to set same servo to 1. when I activated both, servo was repeatedly driven from 0 to 1 in jitter pattern, not reaching either. Can't say if it is a bug or a feature, because I can see why it is logical thing to happen.
  Also, if Sequence->Transition time is over before value is reached, and Repeat is Off, value stops "in the middle". E.g. I set servo to 1 with button and Transition it to -1 over 0.5 seconds, with no repeat to force complete transition. Servo stops around half-way to the -1. I expected it to be forcibly set to -1 if timer is out.
  they should get the basics right first,before adding fancy features
  
   
  like sequences  less

  • February 7, 2016
• 
  Makar V replied to a topic in the forum Support:

  Eduard Surovin said:
  Today I found out that 2 sequences mapped to same channel with Repeat set to On "fight" each other. I set first sequence to repeatedly set servo to 0, and second to set same servo to 1. when I activated both, servo was repeatedly...  moreEduard Surovin said:
  Today I found out that 2 sequences mapped to same channel with Repeat set to On "fight" each other. I set first sequence to repeatedly set servo to 0, and second to set same servo to 1. when I activated both, servo was repeatedly driven from 0 to 1 in jitter pattern, not reaching either. Can't say if it is a bug or a feature, because I can see why it is logical thing to happen.
  Also, if Sequence->Transition time is over before value is reached, and Repeat is Off, value stops "in the middle". E.g. I set servo to 1 with button and Transition it to -1 over 0.5 seconds, with no repeat to force complete transition. Servo stops around half-way to the -1. I expected it to be forcibly set to -1 if timer is out.
  they should get the basics right first,before adding fancy features  less

  • February 3, 2016
• 
  Makar V replied to a topic in the forum Support:

  Denis H said:
  Just tested the new update....and now i don't have that big lag/delay using my profile with sliders. Great!!!!  I played about 30 minutes with my Buggy and controls feels nice now.
   
  Also i don't have the issues when i update my...  moreDenis H said:
  Just tested the new update....and now i don't have that big lag/delay using my profile with sliders. Great!!!!  I played about 30 minutes with my Buggy and controls feels nice now.
   
  Also i don't have the issues when i update my profiles from the PD (the forever loading icon in the app).
  **Edit: Nop....i speak to soon.....the forever loading icon in the app when you want to update your profile or add a new one still happens. Clear the data and enter again in the app fix it, but you have to star from zero.
   
   
  Now you can tell this is a "real" APP!!! 
  @Sbrick-Team: the minimum you can do is send a sbrick for FREE to the active people in the forum who as tested the APP for more than a YEAR!!! i have to admit, I never thought that my patience was so generous.
  THanks!!!!
  
  same  less

  • January 31, 2016
• 
  Makar V replied to a topic in the forum Support:

  • January 24, 2016
• 
  Makar V replied to a topic in the forum Support:

  Makar V said:
  Makar V said:
  SO FAR...  moreMakar V said:
  Makar V said:
  SO FAR WORKING!!!!!!!!
  
   
   
  SO HAPPY!
  
   
  I have come to the conclusion.
   
   
  It WORKS!!!!!!!
   
  THANK YOU!!!!  

  • January 24, 2016
• 
  Makar V replied to a topic in the forum Support:

  Makar V said:
  SO FAR...  moreMakar V said:
  SO FAR WORKING!!!!!!!!
  
   
   
  SO HAPPY!  

  • January 24, 2016
• 
  Makar V replied to a topic in the forum Support:

  SO FAR WORKING!!!!!!!!

  • January 24, 2016
• 
  Makar V replied to a topic in the forum Support:

  Tamas Misik said:
  Thanks Peer for the update :)
  
  If everything goes well then the new Android application will be available within a few days. It will uses the same code like the "Simple...  moreTamas Misik said:
  Thanks Peer for the update :)
  
  If everything goes well then the new Android application will be available within a few days. It will uses the same code like the "Simple Control"
  
  More details soon.
  
  if it doesnt work i want a refund.  

  • January 14, 2016
• 
  Makar V replied to a topic in the forum Support:

  Szymon Z said:
  I need to buy BLE phone because I don't have one. Is there any list of phones which are working always correctly with sbrick android app? Also list with phones which I should not buy because app is very unstable on it?
  
  Dont buy the Galaxy A5

  • January 8, 2016
• 
  Makar V replied to a topic in the forum Support:

  cant get it to work on the galaxy a5 :( 

  • December 22, 2015
• 
  Makar V replied to a topic in the forum Support:

  Any news?

  • November 14, 2015
• 
  Makar V replied to a topic in the forum Support:

  Tamas Misik said:
  Hi Guys,The new app worked quite well on some devices, but  on another devices (for example on LG g3 and Samsung galaxy tab) the app crashed sometimes. Today morning we tested a new version, and it seems our developers...  moreTamas Misik said:
  Hi Guys,The new app worked quite well on some devices, but  on another devices (for example on LG g3 and Samsung galaxy tab) the app crashed sometimes. Today morning we tested a new version, and it seems our developers found what was the problem :) We will test a new version today afternoon or tomorrow. Hopefully it will works without problems on all devices. Thanks for your patience. 
  
  Woohoo!yay!  

  • November 9, 2015
• 
  Makar V replied to a topic in the forum Support:

  Marc Jaouen said:
  Tamas Misik, three weeks ago, said:
  Hi Guys,Everything going well, but it seems need a few more days for our developers. They are working hard, so hopefully we can start the public test and you'll see the totally new application soon :)...  moreMarc Jaouen said:
  Tamas Misik, three weeks ago, said:
  Hi Guys,Everything going well, but it seems need a few more days for our developers. They are working hard, so hopefully we can start the public test and you'll see the totally new application soon :) Thanks for the patience.
  
  Tamas, any progress ?
  Marc
   
  
  Its been more than a week :/  

  • November 8, 2015
• 
  Makar V replied to a topic in the forum Support:

  Frederic Ayrault said:
  Makar V said:
  Frederic Ayrault said:
  Makar V...  moreFrederic Ayrault said:
  Makar V said:
  Frederic Ayrault said:
  Makar V said:
  I made a simple profile in the profile designer.
  Then I went to the market and my profiles but it wasnt there.
  Please fix this!
  Thanks for your attention,
  Makar
  
   
  Are you using the good ratio?
   
  
  i used the 2:3 ratio
  
   
  Which mobile do you have?
  
  I have a Samsung Galaxy A5 on 5.0.2 lollipop  

  • November 3, 2015
• 
  Makar V replied to a topic in the forum Support:

  Frederic Ayrault said:
  Makar V said:
  I made a simple profile in the profile designer.
  Then I went to the market and my profiles but it wasnt...  moreFrederic Ayrault said:
  Makar V said:
  I made a simple profile in the profile designer.
  Then I went to the market and my profiles but it wasnt there.
  Please fix this!
  Thanks for your attention,
  Makar
  
   
  Are you using the good ratio?
   
  
  i used the 2:3 ratio  

  • November 1, 2015
• 
  Makar V replied to a topic in the forum Support:

  I made a simple profile in the profile designer.
  Then I went to the market and my profiles but it wasnt there.
  Please fix this!
  Thanks for your attention,
  Makar

  • October 31, 2015
• 
  Makar V replied to a topic in the forum Support:

  Tamás Fábián said:
  The green LED flashing is perfectly normal if you've (possibly accidentally) turned the identification function on. :) This is what the LED do: you can check which SBrick you control by blink the LED.
  The...  moreTamás Fábián said:
  The green LED flashing is perfectly normal if you've (possibly accidentally) turned the identification function on. :) This is what the LED do: you can check which SBrick you control by blink the LED.
  The identification function can be turned on with the simple control by tapping the status line wile it is connected (the line being green).
  Cheers,
  Tamas
  
  Oh.I did tap the status line.I thought it would reconnect and tapped it.It connected but started flashing.
  Thanks,
  Makar  less

  • October 30, 2015
• 
  Makar V replied to a topic in the forum Support:

  Tamas Misik said:
  Makar V said:
  I was just testing my train when one of the lights started flashing but the other didnt.Is there an explanation for this?
   Are you sure the LED is not damaged? What happens if you connect the LED to an...  moreTamas Misik said:
  Makar V said:
  I was just testing my train when one of the lights started flashing but the other didnt.Is there an explanation for this?
   Are you sure the LED is not damaged? What happens if you connect the LED to an another port on the SBrick?
  
  it was the green led in the sbrick  

  • October 28, 2015
• 
  Makar V replied to a topic in the forum Support:

  Tamas Misik said:
  Which application do you use? The Simple Control or the official SBrick Android app?
  
  simple control

  • October 27, 2015
• 
  Makar V replied to a topic in the forum Support:

  I was just testing my train when one of the lights started flashing but the other didnt.Is there an explanation for this?

  • October 27, 2015
• 
  Makar V replied to a topic in the forum Support:

  Makar V said:
  The OTA update is finally working!Im updating right now and it seems to be working!
  its done!

  • October 27, 2015
• 
  Makar V replied to a topic in the forum Support:

  The OTA update is finally working!Im updating right now and it seems to be working!

  • October 27, 2015
• 
  Makar V replied to a topic in the forum Support:

  any news?
  I cant wait till there is news

  • October 27, 2015
• 
  Makar V replied to a topic in the forum Support:

  any news?

  • October 25, 2015
• 
  Makar V replied to a topic in the forum Support:

  Tamas Misik said:
  Hi Guys,Everything going well, but it seems need a few more days for our developers. They are working hard, so hopefully we can start the public test and you'll see the totally new application soon :) Thanks for the patience.
  
  Yay!

  • October 17, 2015
• 
  Makar V replied to a topic in the forum Support:

  Frederic Ayrault said:
  Kevin Bacon said:
  Hi,
  First, let me say that you guys have a great innovative product with...  moreFrederic Ayrault said:
  Kevin Bacon said:
  Hi,
  First, let me say that you guys have a great innovative product with SBrick! 
  I have been testing the last week with SBrick.  I have a Samsung Galaxy S6 with Android 5.1.1 and the SBrick at firmware 4.4.  The only thing I noticed is that every so often, regardless of distance the communication is dropped and most of the time this locks the app.  I tried both the SBrick 1.7 app and the SimpleControl available from Google store with the same result.  Just today, I downloaded the SimpleControl posted in the forum and this no longer happens!
  Look forward to the next version of SBrick for Android.  Any idea on a next version that brings the functionality available on iOS to Android and this fix?
  Thanks - keep up the good work you guys!
  
   
  I am also waiting for this new version.
  I hope il will be fully operationnal and provides all the functionnality of iOS.
  I do not want to wait almost one more year with an alpha...    less

  • October 11, 2015
• 
  Makar V replied to a topic in the forum Support:

  Makar V said:
  Tamás Fábián said:
  Michael, bachaddict, and anyone else ready for an adventure ;)
  Here is a new version of the Simple Control:...  moreMakar V said:
  Tamás Fábián said:
  Michael, bachaddict, and anyone else ready for an adventure ;)
  Here is a new version of the Simple Control: https://www.dropbox.com/s/crziibp5nyzsgag/simplecontrol-201510021700.apk?dl=0
  It uses appropriate API calls on each Android version to initiate scanning, and requests the OS to use faster connection.
  It also displays connection information on the green status bar when connected (after a few seconds, it looks like this: 48.8ms/0/17321.0). The first number is the connection interval, the second is the slave latency, the third is the connection timeout.
  Good luck,
  Tamas
   
  
   
  Hi Tamas!
  It Works!.........Sometimes.
  I still cant update the firmware on one of my sbricks or pair with any of them.It just says cannot communicate with sbrick.
  Thanks,
  Makar
   
  
  Finally able to pair! but still wont work  less

  • October 3, 2015
• 
  Makar V replied to a topic in the forum Support:

  Tamás Fábián said:
  Michael, bachaddict, and anyone else ready for an adventure ;)
  Here is a new version of the Simple Control: https://www.dropbox.com/s/crziibp5nyzsgag/simplecontrol-201510021700.apk?dl=0
  It uses appropriate API...  moreTamás Fábián said:
  Michael, bachaddict, and anyone else ready for an adventure ;)
  Here is a new version of the Simple Control: https://www.dropbox.com/s/crziibp5nyzsgag/simplecontrol-201510021700.apk?dl=0
  It uses appropriate API calls on each Android version to initiate scanning, and requests the OS to use faster connection.
  It also displays connection information on the green status bar when connected (after a few seconds, it looks like this: 48.8ms/0/17321.0). The first number is the connection interval, the second is the slave latency, the third is the connection timeout.
  Good luck,
  Tamas
   
  
   
  Hi Tamas!
  It Works!.........Sometimes.
  I still cant update the firmware on one of my sbricks or pair with any of them.It just says cannot communicate with sbrick.
  Thanks,
  Makar
     less

  • October 2, 2015
• 
  Makar V replied to a topic in the forum Support:

  Tamas Misik said:
  Hi Makar,Do you try to use the app this way? https://www.youtube.com/watch?v=S5NtKQJOdbUIf yes, and if your still doesn't connect to the SBrick, please try to pair your phone with your SBrick...  moreTamas Misik said:
  Hi Makar,Do you try to use the app this way? https://www.youtube.com/watch?v=S5NtKQJOdbUIf yes, and if your still doesn't connect to the SBrick, please try to pair your phone with your SBrick (https://www.youtube.com/watch?v=v13O7wWiXm0 ) and try it again use the simple control app: 
  
  Hi Tamas!
   
  just tried it and it worked!
  I discovered i hade firmware version 4.3 not 4.4 and updated that.
  Then tried the sbrick app and that worked too but only for a short amount of time.
  It then didnt respond and closed.
  Thanks for your attention,
  Makar
   
     less

  • October 1, 2015
• 
  Makar V replied to a topic in the forum Support:

  Tamas Misik said:
  Does not matter when did you restart your phone :)Please download this simple control application? Does it work on your phone? Can you control the SBrick with this...  moreTamas Misik said:
  Does not matter when did you restart your phone :)Please download this simple control application? Does it work on your phone? Can you control the SBrick with this application?https://play.google.com/store/apps/details?id=com.vengit.blecontrol&hl=en
  
  hi Tamas!
  Already had the app but experiencing the same problems.
  Finds sbricks,opens the control panel then doesnt connect to the sbricks.
  Its a great idea but has the same issues.
  Thanks,
  Makar  

  • September 30, 2015