Updates

• 
  Lothar Weigl → Jan Stefan: Welcome to SBRICK! Have lot of fun!

  • Mon at 7:19 PM
• 
  Lothar Weigl → Pascal Oberholzer: Welcome to SBRICK! Have lot of fun!

  • Mon at 7:19 PM
• 
  Lothar Weigl → Jürgen Übele: Welcome to SBRICK! Have lot of fun!

  • Mon at 7:19 PM
• 
  Lothar Weigl → Marc André Wyss: You should send a message to SBRICK-Admin! and have a look at the topics at the forum, probably you have to post your problem under a different topic. I use an old android version something like 4.4.x.

  • Jul 9
• 
  Lothar Weigl → Roland B: Sorry for stupid question but did you use ProfileDesigner? As far as I understand the created profiles are stored on the SBRICK-server independently of the phone you use to control your models.

  • Jul 5

  • 
    Lénárd Pásztor Yes you are right, but the configuration is not synced between devices automatically. This is something which is on our todo list.

    • Mon at 3:59 PM
• 
  Lothar Weigl replied to a topic in the forum Support:

  My SBRICK (the old one's) have hardware version 5 and firmware version 23 which is obviously the actual Version? Do not worry the app is not perfect, probably some minor misfunction.

  • Jul 5
• 
  Lothar Weigl → Jonas Heubl: Welcome to SBRICK! Have lot of fun!

  • Jul 5
• 
  Lothar Weigl → Slaven Pelicaric: Welcome to SBRICK! Have lot of fun!

  • Jun 29

  • 
    Slaven Pelicaric Thx

    • Jun 29
• 
  Lothar Weigl → rekrek: Welcome to SBRICK! Have lot of fun!

  • Jun 26

  • rekrek likes this.
• 
  Lothar Weigl replied to a topic in the forum Support:

  I am unsure of my hint but probably you mix two things which do not work together? The official SBRICK is as far as I know not useable with Windows8 Computers. The Windows8 machine can only control the SBICK with the help of SCRATCH. The SBRICK APP is...  moreI am unsure of my hint but probably you mix two things which do not work together? The official SBRICK is as far as I know not useable with Windows8 Computers. The Windows8 machine can only control the SBICK with the help of SCRATCH. The SBRICK APP is only available for Android and IOS as far as I know? Unfortunately, I use only the simple SBRICKS with WINDOWS8 Laptop, BLED... and SCRATCH = works mostly good, but the control is rough. I use Android tablet with SBRICK app (and Profile Designer) = 95% it works fine.  less

  • Jun 25
• 
  Lothar Weigl replied to a topic in the forum Introduce Yourself:

  An SBRICK has four ports, isn't? 2 Ports for the steering servos, 1 Port for one XL motor and the last port for the last 2 XL Motors. Two XL motors are no problem for a SBRICK port.

  • Jun 23
• 
  Lothar Weigl replied to a topic in the forum Support:

  I think your idea is realistic. Did you do an experience already? There are different functions in the sequence editor and you can choose an restart. I have i.e. a turntable which makes half a turn, pauses and then turns back to the start (more or less...  moreI think your idea is realistic. Did you do an experience already? There are different functions in the sequence editor and you can choose an restart. I have i.e. a turntable which makes half a turn, pauses and then turns back to the start (more or less exactly) and by selecting a different setting it repeat the movement until the control is pushed again if this setting is select.
  Unfortunately, I never used the circuit function!  

  • Jun 21
• 
  Lothar Weigl replied to a topic in the forum News and Announcements:

  Debe funcionar desde hoy (jueves, Alemania) sin problemas. El Admin de SBRICK declaró el fin de problemas por ANDROID.
  Hasta la próxima problema? 

  • Jun 20
• 
  Lothar Weigl replied to a topic in the forum Support:

  : good job SBRICK!!! Thank you very much!

  • Jun 20
• 
  Lothar Weigl replied to a topic in the forum Support:

  HI SBRICK? Are you still alive? ANDROID is calling for help!!! This is a very bad joke from you ,SBRICK?

  • Jun 19
• 
  Lothar Weigl replied to a topic in the forum News and Announcements:

  Este problema existe desde el ultímo domingo. Utilices Android tambíen?

  • Jun 18
• 
  Lothar Weigl replied to a topic in the forum Support:

  Hello? Is there still anybody out there? Android is calling for help!!!

  • Jun 18
• 
  Lothar Weigl replied to a topic in the forum Support:

  The problem with android still continues? Only profile-designer = WINDOWS is fully functional which was not the thing on sunday afternoon when profile... was out of service totally. 

  • Jun 17
• 
  Lothar Weigl liked Wim Bilink's photo.

  

  • Jun 15

  • Lénárd Pásztor and Lothar Weigl like this.
• 
  Lothar Weigl replied to a topic in the forum Support:

  Go to backgrounds. Here you click on the actual image (Windows).

  • Jun 15
• 
  Lothar Weigl replied to a topic in the forum Support:

  If you have the correct andoid version Scratch is probably useless for you. The SBrick App is a fine programmed control station, it does work app. 95% in my case. I think android or my tablet has some problems but it works more or less...  moreIf you have the correct andoid version Scratch is probably useless for you. The SBrick App is a fine programmed control station, it does work app. 95% in my case. I think android or my tablet has some problems but it works more or less correct.
  Programing is possible with the profile designer using the sequence button / sequence editor which appears after starting the sequence. It is simple but I am a simple person too. I have no experience with circuit.
  Ask as often as you have problems! Unfortunately, I can only help very basically. I bought my SBrick from a german seller: Rentabrick who helps in german language.  less

  • Jun 9
• 
  Lothar Weigl replied to a topic in the forum Support:

  This Windows7+ is only for Scratch-Versions!
  For Windows minor then Version 10 you have to use the special dongle BLED112, no other way. I made the same experience already. It is better to buy a cheap android tablet with Version 4.4.2 i.e.

  • Jun 4
• 
  Lothar Weigl replied to a topic in the forum Support:

  Which WINDOWS Version are you running? In the mentioned post the user has Version 10! Earlier Versions want do!!

  • Jun 3
• 
  Lothar Weigl replied to a topic in the forum Introduce Yourself:

  Welcome to SBrick!
  You are not the onliest senior here. When I was younger I did not like Lego Technic Modells, they did not look like normal Lego Modells which looked pretty already a few decades ago. The old simple Modells were a good idea without all...  moreWelcome to SBrick!
  You are not the onliest senior here. When I was younger I did not like Lego Technic Modells, they did not look like normal Lego Modells which looked pretty already a few decades ago. The old simple Modells were a good idea without all the small parts and so many different colors nowadays.
  The start with SBrick was difficult for me, because I am not accosted to the new computers.  

  • Jun 2
• 
  Lothar Weigl replied to a topic in the forum Introduce Yourself:

  Willkommen im Forum!
  Ich hoffe, du baust weitere Modelle mit ebenso großer Begeisterung. Ich habe leider immer wieder Probleme mit Lego Technic selbst und SBrick kostet mich immer wieder viel Nervenkraft. Zumindest die SBrick Probleme sind aber...  moreWillkommen im Forum!
  Ich hoffe, du baust weitere Modelle mit ebenso großer Begeisterung. Ich habe leider immer wieder Probleme mit Lego Technic selbst und SBrick kostet mich immer wieder viel Nervenkraft. Zumindest die SBrick Probleme sind aber hausgemacht, die Leute haben schon gute Arbeit geleistet.  

  • Jun 2
• 
  Lothar Weigl → Germany/Deutschland: Interessante Sammlung von Originalbauanleitungen.

  http://www.brickfactory.info

  http://www.brickfactory.info

  • May 13
  • - edited
• 
  Lothar Weigl posted a topic in the group Germany/Deutschland:

  Wo gibt es ausführlichere Erklärungen zu den Sequenzfunktionen SET und TRANSITION und möglichst eine Einführung in CIRCUITS ?

  • May 12
• 
  Lothar Weigl joined the group Germany/Deutschland

  • May 12
• 
  Lothar Weigl → SilverGame: Einfach die Anleitungen von Google oder von BabelFish übersetzen lassen, ist zumindest ein Einstieg in die Materie, welche leider nur öberflächlich erklärt wird. UND: Dranbleiben, die Programmfunktionen kosten mich eine Menge Nervenkraft, dich vielleicht auch?

  • May 12
• 
  Lothar Weigl Erfolg!!!
  
  Ich habe endlich eine Sequenz zum Funktionieren gebracht, nach vielem Schimpfen und Fluchen! Die Texte von SBrick lesen und ins Deutsche übersetzen ist ein wesentlicher Vorteil am Anfang mit der Arbeit bei SBrick. Nachdem ich endlich einige...  moreErfolg!!!
  
  Ich habe endlich eine Sequenz zum Funktionieren gebracht, nach vielem Schimpfen und Fluchen! Die Texte von SBrick lesen und ins Deutsche übersetzen ist ein wesentlicher Vorteil am Anfang mit der Arbeit bei SBrick. Nachdem ich endlich einige Dinge verstanden habe, kann ich den Autoren der Anleitung für den ProfileDesigner nur Respekt entgegenbringen. Die Texte kann man nicht besser machen, das Problem war in meinem Fall wieder einmal nur ich selbst.  

  • Mar 13