Updates

• 
  Maxim Baybakov replied to a topic in the forum Support:

  Imre Kiss said:
  This means: if the application doesn't detect the brick, it asks: you really have a brick and it's working?
  No. Sbrick is detected, but still display (4-5 sec later) a message "Sbrick is powered?". After press "ok" app was...  moreImre Kiss said:
  This means: if the application doesn't detect the brick, it asks: you really have a brick and it's working?
  No. Sbrick is detected, but still display (4-5 sec later) a message "Sbrick is powered?". After press "ok" app was crash.It was not all the time, but still was. Now im not getting this message - i dont know what has changed.Update:After 4-5 tries third sbrick was updated (restart phone, on/off bluetooth, on/off sbrick).I dont know, it is important or not. On the three sbrick:Port A (invert off)Acceleration +1 - backward ; Acceleration -1 - forward.Port A (invert on)Acceleration +1 - forward ; Acceleration -1 - backward.Port B (invert off)Acceleration +1 - backward ; Acceleration -1 - forward.Port B (invert on)Acceleration +1 - backward ; Acceleration -1 - forward.Port C (invert off)Acceleration +1 - forward ; Acceleration -1 - backward.Port C (invert on)Acceleration +1 -...    less

  • April 14, 2015
• 
  Maxim Baybakov replied to a topic in the forum Support:

  Karl Fensterstock said:
  And now come this !!!!!
  
  I'm at a loss ???? If i open "Manage Brick" and wait for 4-5 second than i also from time to time get "Sbrick is powered?". And now i chose detected sbrick immediately.

  • April 14, 2015
• 
  Maxim Baybakov replied to a topic in the forum Support:

  Samsung s3 i9300From the second try i could update my second sbrick (third i will try later).There is the error with invert on the port C

  • April 13, 2015
• 
  Maxim Baybakov replied to a topic in the forum Support:

  About that two bricks do not work at the same time, I know.But I somehow missed, that it is impossible to connect two ports on one function (such as port A and B - Acceleration 1).Is that so?

  • April 10, 2015
• 
  Maxim Baybakov replied to a topic in the forum Support:

  Can't update second sbrick - "check your internet connection". Im write from this connection :).Install/reinstall.I will look for another connection.updFound a new connection. Began repeating the process updates. Many times. Written above (Denis H) no...  moreCan't update second sbrick - "check your internet connection". Im write from this connection :).Install/reinstall.I will look for another connection.updFound a new connection. Began repeating the process updates. Many times. Written above (Denis H) no help. :(I will try with a third sbrick.With the third brick - all the same :(.  

  • April 8, 2015
• 
  Maxim Baybakov replied to a topic in the forum Support:

  After another reinstali i can run profile. But invert for servo doesn't work.

  • April 5, 2015
• 
  Maxim Baybakov replied to a topic in the forum Support:

  Denis H said:
  BUT now everytime i want to use the sbrick (select in the port tester or profile screen) the app ask me again and again and again that i need to update the firmware (i already update the firmware 6 times)...i CAN'T USE THE SBRICK!! the app...  moreDenis H said:
  BUT now everytime i want to use the sbrick (select in the port tester or profile screen) the app ask me again and again and again that i need to update the firmware (i already update the firmware 6 times)...i CAN'T USE THE SBRICK!! the app always ask me for an firmware update, all updates are OK. Strange, in my case the app only once requests for update the firmware after updating. And I rejected this request.Do you try to delete completely the app and reinstall it?   

  • April 5, 2015
• 
  Maxim Baybakov replied to a topic in the forum Support:

  Samsung S3 i9300In port tester, i havn't delay anymore. This is a very big step forward, as for my.Also i updated firmware my sbrick (for the first time).But i can't run any profile in "my new creation" - app is closed.For my phone model its a progress. Thanks!

  • April 5, 2015
• 
  Maxim Baybakov replied to a topic in the forum Support:

  Tamas Misik said:
  @For the othersThe new App will be availabe soon. Our developers are working hard on it. They are fixed many bugs. More info about the new application the next few days.Thanks for your help and your patience! 
  
  May I (and not only...  moreTamas Misik said:
  @For the othersThe new App will be availabe soon. Our developers are working hard on it. They are fixed many bugs. More info about the new application the next few days.Thanks for your help and your patience! 
  
  May I (and not only me) expect the fixing delay/freeze while giving the command and its running (5-8 sec) on Samsung Galaxy S3 9300?  

  • March 19, 2015
• 
  Maxim Baybakov replied to a topic in the forum Support:

  Gábor Polczer said:
  Maxim, Samsung Galaxy S3 is not even on the list, you should add it first if you have problems with it.
  And developers for what ?!With my poor knowledge of English, I wrote several times about the error for Samsung S3. And now...  moreGábor Polczer said:
  Maxim, Samsung Galaxy S3 is not even on the list, you should add it first if you have problems with it.
  And developers for what ?!With my poor knowledge of English, I wrote several times about the error for Samsung S3. And now it turns out that it was necessary to add some sort of record in the "wiki". Are you kidding ?! Kindergarten...  

  • March 2, 2015
• 
  Maxim Baybakov replied to a topic in the forum Support:

  You read all comments? Or you specially ignore Samsung Galaxy S3?

  • March 2, 2015
• 
  Maxim Baybakov replied to a topic in the forum Support:

  Denis H said:
  Testing the Sbrick simple app v1.5
  Samsung Galaxy S3
  Android...  moreDenis H said:
  Testing the Sbrick simple app v1.5
  Samsung Galaxy S3
  Android 4.3
  Now indeed the discovery is really fast, like 0.1 sec
  Connecting take about 2 seconds
  BUT, sliders don't work at all....i just can play with slider like 5 minutes, even left slider at max for about 15 or more seconds, and NO engine is moving. And occasionaly one engine moves about 1 sec (like a massive delay). PLEASE can you borrow a S3 and test, S3 is a popular model. This app and the other is still trash, sorry but i start to get a little angry with this purchase.
  All the same.Also can't add profile from PROFILE DESIGNER.   less

  • February 13, 2015
• 
  Maxim Baybakov replied to a topic in the forum Support:

  Maxim Baybakov said:
  I have the same "long" delay. Especially when using steering control or two ports.When the slider quickly move in different directions, for example 20 times, brick continues to perform these commands for 15-20 seconds.
  Several...  moreMaxim Baybakov said:
  I have the same "long" delay. Especially when using steering control or two ports.When the slider quickly move in different directions, for example 20 times, brick continues to perform these commands for 15-20 seconds.
  Several times the application was closed itself.
  Inversion of ports does not always work (if on/off is the inversion).(Samsung Galaxy S3, 4.3)
  
  Was this promlem solved? This delay limits the using of sbrick very much.  

  • February 5, 2015
• 
  Maxim Baybakov replied to a topic in the forum Support:

  Samsung S3 9300
  "discovering sbrick..." for 3-5 sec and the label "discovering sbrick..." disappears, no one sbrick is found.
  When I choose any profile in moc for test, the app freezes for several sec and closes.

  • January 24, 2015
• 
  Maxim Baybakov replied to a topic in the forum Support:

  https://www.youtube.com/watch?v=G4UFWNYyyEUThe same problems in the port test

  • January 7, 2015
• 
  Maxim Baybakov replied to a topic in the forum Support:

  I have the same "long" delay. Especially when using steering control or two ports.When the slider quickly move in different directions, for example 20 times, brick continues to perform these commands for 15-20 seconds.
  Several times the application...  moreI have the same "long" delay. Especially when using steering control or two ports.When the slider quickly move in different directions, for example 20 times, brick continues to perform these commands for 15-20 seconds.
  Several times the application was closed itself.
  Inversion of ports does not always work (if on/off is the inversion).(Samsung Galaxy S3, 4.3)  

  • January 7, 2015
• 
  Maxim Baybakov replied to a topic in the forum Support:

  Norman Chalcraft said:...
  Still can't add a Set, only a MOC.  Still can't discover a brick.  We live in...  moreNorman Chalcraft said:...
  Still can't add a Set, only a MOC.  Still can't discover a brick.  We live in hope! 
  
  https://play.google.com/store/apps/details?id=com.vengit.sbrick&hl
  SBrick 0.0.22
  - Port inverter fix
  - Profil view crash fix
  - Market layout fix
   
  Wait for another patch :)  

  • January 6, 2015
• 
  Maxim Baybakov replied to a topic in the forum Support:

  Dear developers, When can we expect a patch on app with elimination of undetected Sbrick on Samsung S3? Can you name the time - one week, two weeks or month ...

  • January 4, 2015
• 
  Maxim Baybakov replied to a topic in the forum Support:

  Norman Chalcraft said:
  Samsung Galaxy S3 - GT-19300 - Android 4.3 - 0.21
  Cannot add a set to the App only a MoC.  Cannot see or connect to Sbrick from the app.  Can connect to Sbrick via nRF Master Control Panel and then actually control the...  moreNorman Chalcraft said:
  Samsung Galaxy S3 - GT-19300 - Android 4.3 - 0.21
  Cannot add a set to the App only a MoC.  Cannot see or connect to Sbrick from the app.  Can connect to Sbrick via nRF Master Control Panel and then actually control the Sbrick.
   
  Hope this helps
  +1Exactly the same problem (Samsung Galaxy S3 - GT-I9300 - Android 4.3 - 0.21)  

  • January 2, 2015
• 
  Maxim Baybakov is now friends with Sergii Panchenko.

  • December 28, 2014
• 
  Maxim Baybakov replied to a topic in the forum Support:

  Norman Chalcraft said:In order to check the visibility of an SBrick I have installed the utility Nordic nRF Master Control Panel.  Using this  can discover an SBrick, connect to it and even Bond with it.
  Thank you for program! Now I saw my...  moreNorman Chalcraft said:In order to check the visibility of an SBrick I have installed the utility Nordic nRF Master Control Panel.  Using this  can discover an SBrick, connect to it and even Bond with it.
  Thank you for program! Now I saw my bricks :)At least we have three people with a problem "discovering sbrick..." using Galaxy S3. I hope we will not stay without attention!  

  • December 27, 2014
• 
  Maxim Baybakov replied to a topic in the forum Support:

  Hello!I have a Samsung s3 gt i9300 (android 4.3).Unable to find sbrick - "discovering sbricks" and nothing more.I have tried several different bricks.
  Reinstalling the program's nothing changed. 

  • December 23, 2014
• 
  Maxim Baybakov has just signed up. Say hello!

  • December 23, 2014