Updates

• 
  Imre Kiss replied to a topic in the forum Support:

  Adam Kozak said:
  Hi Guys,
  after some time away from my SBrick today I tried to get it working.
  I updated the app on my HTC One M7 to the latest, 1.6.1, and I was not able to update the SBrick firmware. I asked some help from a friend who has an iPhone...  moreAdam Kozak said:
  Hi Guys,
  after some time away from my SBrick today I tried to get it working.
  I updated the app on my HTC One M7 to the latest, 1.6.1, and I was not able to update the SBrick firmware. I asked some help from a friend who has an iPhone and was able to update the firmware and the port tester was working.
  Back to my HTC One M7 and I was able to connect to the brick but the port tester was not working, nor any actual profiles. While moving the sliders the motor is not powered, also the LED on the brick is always on, tapping the "Identify LED" button in the app does nothing.
  Can anyone test it with an HTC? I assume there must be some issue with the Android app, as the functions were working in the Apple version.
  Thanks!
  
  Try to delete and reinstall app, please.  less

  • July 20, 2015
• 
  Imre Kiss replied to a topic in the forum Support:

  Dmitriy Kal'ko said:
  Hallo!
  Six months have a sbrick, but never managed fine to use it. Version 1.5 can only update the firmware of the sbrick and login. Sliders in port tested not working. A constantly lit led, while the mute function is available....  moreDmitriy Kal'ko said:
  Hallo!
  Six months have a sbrick, but never managed fine to use it. Version 1.5 can only update the firmware of the sbrick and login. Sliders in port tested not working. A constantly lit led, while the mute function is available. When will I be able to use your sbrick?
   Device: Samsung Galaxy Note 3 (SM-N9005), Android 5.0
  
  Try to delete the app and reinstall please!
     

  • June 26, 2015
• 
  Imre Kiss replied to a topic in the forum Support:

  We'll release a new version on this thursday:
  - ota improvements (+bug fixing)- ota success check- one function two ports on the same brick

  • April 28, 2015
• 
  Imre Kiss replied to a topic in the forum Support:

  For technical reasons you have to restart the bluetooth manually after the firmware update. Before the bluetooth restart nothing will work.Did you restarted the bluetooth?
  Simon Beaupré said:
  I do the new update for android.  Now everytime i...  moreFor technical reasons you have to restart the bluetooth manually after the firmware update. Before the bluetooth restart nothing will work.Did you restarted the bluetooth?
  Simon Beaupré said:
  I do the new update for android.  Now everytime i want to connect to SBrick the program ask me to do the Firmware update and can't do nothing more, i try it 4 times.  The port tester didn't work anymore.  The LED test work.  Using Samsung galaxy tab4 8"  It works ok before the update but now it don't work.
   
  update:  After many and many ways to update the SBrick, i finally got it, can't find out really why this time it work.  (i try really near of my tablet, brand new battery, nothing connect to the port, etc...)  When it was update the light will stay ON.  The invert port button now didin't work but we can correct this problem by change the slide button angle 0 to 180 and 90 to 270.  Can't still not control 2 port for one action.  I try another...    less

  • April 27, 2015
• 
  Imre Kiss replied to a topic in the forum Support:

  We have lot of device specific errors. We are working on every problem.
  Marcin Cebula said:
  Simon Beaupré said:
  I do the new update for android.  Now everytime i want to connect to SBrick the program ask me to do the Firmware update and can't...  moreWe have lot of device specific errors. We are working on every problem.
  Marcin Cebula said:
  Simon Beaupré said:
  I do the new update for android.  Now everytime i want to connect to SBrick the program ask me to do the Firmware update and can't do nothing more, i try it 4 times.  The port tester didn't work anymore.  The LED test work.  Using Samsung galaxy tab4 8"  It works ok before the update but now it don't work.
  Dear Sbrick Team
   
  I can state the same as above, I can do nothing with newest app version 1.2 I can only try to update the the firmware without any succes ! I am asking where is the improvement. I am waiting for working product since December 2014. I did not track every update but after 4 months I was expecting significant improvement but I can not do any simple action with the sbrick. (Samsung S4 mini).If this is the progres of 4 months the working app may appear in 2020.
  You really do not care about android customers.  less

  • April 27, 2015
• 
  Imre Kiss replied to a topic in the forum Support:

  The update result checker doesn't work correctly at this time. We are working on this problem.
  Robert Lee said:
  just downloaded latest update on v2 nexus 7 try to link had to do OTA  firmware update now stuck in loop turn off Bluetooth turn of...  moreThe update result checker doesn't work correctly at this time. We are working on this problem.
  Robert Lee said:
  just downloaded latest update on v2 nexus 7 try to link had to do OTA  firmware update now stuck in loop turn off Bluetooth turn of app turn off SBrick turn all back on and tells me to do the processs over after 3 time I am getting ****** off any solution to this    

  • April 27, 2015
• 
  Imre Kiss replied to a topic in the forum Support:

  Send me your device type and Android version, please.
  Marc Jaouen said:
  Just for information, I had too many application crashes with v1.2 and downgraded to version 1.1.
  Version 1.1 is operational when you can update the firmware and when you have only...  moreSend me your device type and Android version, please.
  Marc Jaouen said:
  Just for information, I had too many application crashes with v1.2 and downgraded to version 1.1.
  Version 1.1 is operational when you can update the firmware and when you have only one Sbrick, so I'll stick to this version until a real working app, correctly tested and validated, is issued.  

  • April 27, 2015
• 
  Imre Kiss replied to a topic in the forum Support:

  Try to on/off Bluetooth!
  Anton Hylander said:
  Hi
  I have some problems with the connection to the...  moreTry to on/off Bluetooth!
  Anton Hylander said:
  Hi
  I have some problems with the connection to the Sbrick. 
  My phone: Sony Xperia Z2 with Android (lolipop) 5.0.2
  I can Connect to the Sbrick, and I've done the firmware update. The problem is that neither any profiles or the port tester work.
  I have all cables connected and everything is fine, so it should work...
  Please help!
     

  • April 27, 2015
• 
  Imre Kiss replied to a topic in the forum Support:

  We haven't got any lag problem or crashing on Nexus 5.Nobody have indicated this problem earlier, here in the forum.Is your Nexus rooted?
  Miguel Angel Vilela said:
  Hi...  moreWe haven't got any lag problem or crashing on Nexus 5.Nobody have indicated this problem earlier, here in the forum.Is your Nexus rooted?
  Miguel Angel Vilela said:
  Hi again,
   
  So I got this car, with 2 Buggy motors for drive and servo for steering, which seems like it should be perfect to drive with SBrick... but it's only perfect for crashing :(
  There is still a noticeable lag in commands, I tell the car to steer and by them time (I hear) the servo steers the car it's too late, BAM!
   
  Then I also had lots of app crashes while driving. Like, LOTS. Every. Single. Time. I could drive for literally a few seconds, then app freezed, sometimes leaving with the Buggy motors at full gas! At least now when the app crashed motors would stop. This was all with v1.2 and the latest Android on a Nexus 5.
   
  I deleted the app cache and data, uninstalled the app, then tried again with v1.0 and v1.1. Same frustratin results, but I noticed in my system bluetooth settings that the phone seemed to be...    less

  • April 27, 2015
• 
  Imre Kiss replied to a topic in the forum Support:

  Fernando Correia said:
  ....
  
  Thank you Fernando, we'll check all of them!

  • April 14, 2015
• 
  Imre Kiss replied to a topic in the forum Support:

  Karl Fensterstock said:
  
  I'm at a loss...  moreKarl Fensterstock said:
  
  I'm at a loss ????
   
  
  The app cannot discover the brick. We were built a logger in the brick.
  If you choose "Brick is powered", the app makes a log entry.
  We'll analyze this.
  Thank you for your report!  

  • April 14, 2015
• 
  Imre Kiss replied to a topic in the forum Support:

  Bastian Wauschkuhn said:
  Same problem here on Sony Xperia Z3 compact, Android 5.0.2. When I confirm the question: "SBrick is powered?" with "Yes", a message appears that a log data is transfered to the developers. @Devs: Do you receive this data? Does it...  moreBastian Wauschkuhn said:
  Same problem here on Sony Xperia Z3 compact, Android 5.0.2. When I confirm the question: "SBrick is powered?" with "Yes", a message appears that a log data is transfered to the developers. @Devs: Do you receive this data? Does it help you to address this bug?
  
  Yes, its very important to us! Thank you for your help!  

  • April 14, 2015
• 
  Imre Kiss replied to a topic in the forum Support:

  Maxim Baybakov said:
  Karl Fensterstock said:
  And now come this...  moreMaxim Baybakov said:
  Karl Fensterstock said:
  And now come this !!!!!
  
  I'm at a loss ???? If i open "Manage Brick" and wait for 4-5 second than i also from time to time get "Sbrick is powered?". And now i chose detected sbrick immediately.
  
  This means: if the application doesn't detect the brick, it asks: you really have a brick and it's working?  

  • April 14, 2015
• 
  Imre Kiss replied to a topic in the forum Support:

  Karl Fensterstock said:
  Alexey Tikhvinsky said:
  But app is more stable now and OTA update works like a...  moreKarl Fensterstock said:
  Alexey Tikhvinsky said:
  But app is more stable now and OTA update works like a charm.
  
   
  And why not by me ???
  
  Try to reinstall, please.  

  • April 13, 2015
• 
  Imre Kiss replied to a topic in the forum Support:

  • April 13, 2015
• 
  Imre Kiss replied to a topic in the forum Support:

  PROGRESS REPORT
  The new version is late a bit: It expected to be released on Monday, hopefully.
  We are working now on the two or more bricks support.
  The following bugs fixed:
  - oval joystick on some devices fixed- creation image bug fixed- toast message...  morePROGRESS REPORT
  The new version is late a bit: It expected to be released on Monday, hopefully.
  We are working now on the two or more bricks support.
  The following bugs fixed:
  - oval joystick on some devices fixed- creation image bug fixed- toast message duplication problem fixed- OTA only works when there is only one sbrick powered fixed- continously asks for firmware update, can't use the sbrick on some devices fixed- could connect to sbrick without restart after ota update fixed- sbrick rename problem fixed- when downloading profiles from the market, app doesn't remember about the last downloaded profile fixed- if want to use the created profile second time, the discovery sbrick dialog stay forever fixed- joystick profile fixed- data connections optimized- "check your internet connection" OTA bug fixed- port tester fixed on nexus devices  less

  • April 12, 2015
• 
  Imre Kiss replied to a topic in the forum Support:

  Thank you, we'll change it!
   
  Fernando Correia said:
  I'd suggest it should blink a bit longer, once LED ID is activated.
  Doesn't need to be on/off but a bit longer to look for, if you have several SBricks around, would be convenient. ;)

  • April 10, 2015
• 
  Imre Kiss replied to a topic in the forum Support:

  Fernando Correia said:
  Finaly managed to upgrade my SBricks firmware via OTA.
  Don't whether it happened because fw v4.2 was finally made available in the right place or because I gave it sometime between setting my phone BT on and...  moreFernando Correia said:
  Finaly managed to upgrade my SBricks firmware via OTA.
  Don't whether it happened because fw v4.2 was finally made available in the right place or because I gave it sometime between setting my phone BT on and off.
   
  Then I found also a small bug or a feature yet to update.
  LED ID function seem to have been changed in the latest fw version. Now it just blinks for a couple seconds and then LED remains on.
  Hence the the app behaviour which alternates with on and off commands is not adequate anymore. The messages on screen are misleading and it works only every two touch actions. :)
  Also can't find where to look for SBrick info like HW and FW versions, but guess this is not yet implemented into Android app version.
   
  Apart from this, just looking for App multi SBrick support. There is a LEGO event approaching fast. :D
  
  Yes, the led behaviour was changed. No it's allways lighting. 
  We'll check the on/off and message dialogs problems.
  Thank you for your feedback.  less

  • April 9, 2015
• 
  Imre Kiss replied to a topic in the forum Support:

  We are working on the two or more bricks support and the OTA update errors above.
  The new version expected to be released on this weekend.

  • April 8, 2015
• 
  Imre Kiss has just signed up. Say hello!

  • February 17, 2015