Updates

• 
  Christoph Pfenninger posted a new video:

  5:24

  SBB Twindexx LEGO MOC powered by sbrick

  TWINDEXX Swiss Express is intended for use in Switzerland, customized double-decker trainset for high-speed long-distance traffic on the basis of the platform Bombardier TWINDEXX, the Swiss Federal Railways (SBB) ordered in 2010 at Bombardier Transportati...

  • #Train
  • #Twindexx
  • #Swiss Express

  • July 15, 2016

  • Balint Mezei and Emese Nemeth like this.
• 
  Christoph Pfenninger replied to a topic in the forum Support:

  Hi Sbrick team
  Today simple controll was updated by the Play Store.Now i could finally update to the firmware 4.8 with simple control since a long time.
  Thank you guys.
  All my creations will work now as they should be.
  I have a Sony Z1 Compact with...  moreHi Sbrick team
  Today simple controll was updated by the Play Store.Now i could finally update to the firmware 4.8 with simple control since a long time.
  Thank you guys.
  All my creations will work now as they should be.
  I have a Sony Z1 Compact with android 5.1.1. The sbrick app V2.0 update 1 will will work neu without any crashes.  

  • March 6, 2016
• 
  Christoph Pfenninger replied to a topic in the forum Support:

  Hi Tamas
  Modellnummer is D5503, Android OS 5.1.1, Build-Nummer 14.6.A.1.236, Kernel-Version 3.4.0.... 19. Nov. 2015
  Thanks Christoph

  • February 2, 2016
• 
  Christoph Pfenninger replied to a topic in the forum Support:

  Christoph Pfenninger said:
  Marc Jaouen said:
  Christoph Pfenninger...  moreChristoph Pfenninger said:
  Marc Jaouen said:
  Christoph Pfenninger said:
   
  I this state I can't use my sbricks anymore
  
  That's the situation I was in with the previous 1.9. Here's how I got everything back:
  - Clear your phone from everything related to the SBrick: apps, data, cache, etc...
  - Stop the app called "Bluetooth sharing" or whatever it is called, clear the related data too
  - Stop/Restart the Bluetooth on the phone. You can look if it detects the Sbrick: if the Sbrick is visible, you should be able to pair it as any other Bluetooth device.
  - Reinstall the old v1.6.1 and re-configure the SBrick as before.
  I'm lucky, cause v2.0 works fine for me, but there are still devices that do not accept it...
   
  Hi Marc. I have conficured it like you did. But no way. I think the problem beginns with the bluetooth connection. I'm not able to pair the sbrick. It always appears the message "The connection has been disconnectet by sbrick". But i can see my sbricks in the app.
  @sbrick Team: could it be...    less

  • January 31, 2016
• 
  Christoph Pfenninger replied to a topic in the forum Support:

  Marc Jaouen said:
  Christoph Pfenninger said:
   
  I this state I can't use my sbricks...  moreMarc Jaouen said:
  Christoph Pfenninger said:
   
  I this state I can't use my sbricks anymore
  
  That's the situation I was in with the previous 1.9. Here's how I got everything back:
  - Clear your phone from everything related to the SBrick: apps, data, cache, etc...
  - Stop the app called "Bluetooth sharing" or whatever it is called, clear the related data too
  - Stop/Restart the Bluetooth on the phone. You can look if it detects the Sbrick: if the Sbrick is visible, you should be able to pair it as any other Bluetooth device.
  - Reinstall the old v1.6.1 and re-configure the SBrick as before.
  I'm lucky, cause v2.0 works fine for me, but there are still devices that do not accept it...
   
   
  
  Hi Marc. I have conficured it like you did. But no way. I think the problem beginns with the bluetooth connection. I'm not able to pair the sbrick. It always appears the message "The connection has been disconnectet by sbrick". But i can see my sbricks in the app.
  @sbrick Team: could it be a hardware Problem...    less

  • January 28, 2016
• 
  Christoph Pfenninger replied to a topic in the forum Support:

  I don't think Update is an improvement with app 2.0. As I worte on January 10th I has the same Problems. With the sbrick app as well with simple controll. I reinstalled both apps but nothing helps. The update process stopps either with 6400 bytes or by...  moreI don't think Update is an improvement with app 2.0. As I worte on January 10th I has the same Problems. With the sbrick app as well with simple controll. I reinstalled both apps but nothing helps. The update process stopps either with 6400 bytes or by 5%. The Harware Version of the sbricks shows 4.0.
  By the way, no Motors are connected to the bricks and i have restartet it every time.
  I have a Sony Z1 with Android 5.1.1. My 2 sBricks Showing Firmware 4.3 and Hardware 4.0.
  Are there any Ideas where the problem is?I this statei can't use my sbricks anymore
  
  
  
     less

  • January 25, 2016
• 
  Christoph Pfenninger replied to a topic in the forum Support:

  • January 11, 2016
• 
  Christoph Pfenninger replied to a topic in the forum Support:

  Since days I try to perform a firmware update with "Simple control" to firmware version 4.8. the connection allways crashes about 6400 bytes. I have tryed it a hundret times.I have the latest version app. sbrick run with firmware 4.3. Have a Sony Z1...  moreSince days I try to perform a firmware update with "Simple control" to firmware version 4.8. the connection allways crashes about 6400 bytes. I have tryed it a hundret times.I have the latest version app. sbrick run with firmware 4.3. Have a Sony Z1 Compact. Android version 5.1.1. Hy guys, what's the problem?
  Christoph  

  • January 10, 2016
• 
  Christoph Pfenninger replied to a topic in the forum Support:

  Christoph Pfenninger said:
  Hi
  I Updated my Sony Z1 compact to Android Version 5.0.2 and the sbrick to version 1.3. Then i updated my two sbricks with the new firmware successfully.
  Now i can't use My Creations anymore. I can enter to configure my...  moreChristoph Pfenninger said:
  Hi
  I Updated my Sony Z1 compact to Android Version 5.0.2 and the sbrick to version 1.3. Then i updated my two sbricks with the new firmware successfully.
  Now i can't use My Creations anymore. I can enter to configure my creations to add my profiles, which will not be saved.
  the only way to use my sbricks is, with the Port tester in Manage Bricks.
  I am now very satisfied with this software. I hope it will get better soon. 
  
   
  Since I deinstalled the complete sbrick App including all my cerations, and reinstalled the newest one, all functions work again without problems. 
  thank you sbrick Team.
  One function i still miss. I would like to control two sbricks with one creation.
  Thanks  less

  • May 23, 2015
• 
  Christoph Pfenninger replied to a topic in the forum Support:

  Hi
  I have installed the version 1.4. Now i can enter a Profile in one of my creations. But i can't assing de Chanels in the Profil. There are no chanels displayed.
  I cleard the cache and downloaded it again. but no way to assing the Chanels to the Ports.

  • May 16, 2015
• 
  Christoph Pfenninger replied to a topic in the forum Support:

  Hi
  I Updated my Sony Z1 compact to Android Version 5.0.2 and the sbrick to version 1.3. Then i updated my two sbricks with the new firmware successfully.
  Now i can't use My Creations anymore. I can enter to configure my creations to add my...  moreHi
  I Updated my Sony Z1 compact to Android Version 5.0.2 and the sbrick to version 1.3. Then i updated my two sbricks with the new firmware successfully.
  Now i can't use My Creations anymore. I can enter to configure my creations to add my profiles, which will not be saved.
  the only way to use my sbricks is, with the Port tester in Manage Bricks.
  I am now very satisfied with this software. I hope it will get better soon.   

  • May 15, 2015
• 
  Christoph Pfenninger has just signed up. Say hello!

  • January 7, 2015