Updates

• 
  Rik Lachmann replied to a topic in the forum Support:

  Hey,
  I want to build headlight flasher for my car. A slider sets the brightnes of my headlights. Then I want a button, which flashes the headlights to 100% brightnes and then, the brigthnes should automatically return to its latest...  moreHey,
  I want to build headlight flasher for my car. A slider sets the brightnes of my headlights. Then I want a button, which flashes the headlights to 100% brightnes and then, the brigthnes should automatically return to its latest value. 
   
  Example: 
  brigthnes = 10%I want to flash -> Brigthness = 100%automatic return after I released the button -> brigthnes = 10%
  The value of the brightnes has to be variable, not fixed on 10%.
  I did not find a solution, hope you can help me :)
  Rik
     less

  • January 3, 2017
• 
  Rik Lachmann replied to a topic in the forum Support:

  • January 1, 2017
• 
  Rik Lachmann replied to a topic in the forum Support:

  Ok, I made some tests now.
  SBrick (Hardware 4): Controling steering (Servo) and speed by slider. Just these two controls work pretty fine. BUT: when I connect a third port (Lights) to the SBrick and control this port by a button with no auto-reset, a...  moreOk, I made some tests now.
  SBrick (Hardware 4): Controling steering (Servo) and speed by slider. Just these two controls work pretty fine. BUT: when I connect a third port (Lights) to the SBrick and control this port by a button with no auto-reset, a control-delay is produced. Switching on the lights and start driving is no problem, but after some seconds while driving there is a huge delay (~1sec. delay). If I connect a fourth port and power this port also by a button without auto-reset the delay is bigger.
  For me there can be two reasons:
  1. the App (iOS) cannot send more than 2 signals and produces a delay2. the SBrick cannot receive more than 2 signals and produces a delay
  For my tests I ordered two more SBricks, received them today. (Nice shipping!)Case (1)I used two SBricks (the new one (Hardware 5) have both the same problem like the Hardware 4 one) and seperated driving and steering. Now I started with steering and speed on SBrick A and two lights on SBrick B. I used the same profile on my...    less

  • August 16, 2016
• 
  Rik Lachmann replied to a topic in the forum Support:

  How can I solve my Problem on iOS? Can you tell me the Solution on an iOS device please?

  • August 15, 2016
• 
  Rik Lachmann posted a topic in the forum Support:

  Sbrick+

  Hey guys,
  saw this (https://www.youtube.com/watch?v=STVELT8sJJ4) Video on YT and want to know, what SBrick+ is? Can you tell us some more information about the second generation?
   
  Rumbble

  • August 12, 2016
• 
  Rik Lachmann replied to a topic in the forum Support:

  Hey,
  1 Problem, this SBrick is on Firmware 12... Cant update anymore. 

  • August 4, 2016
• 
  Rik Lachmann replied to a topic in the forum Support:

  Okay, let me tell you the complete story.Last year i bought 2 SBricks. 1 was always in use and up to date. With the new App for iOS I started setting up some sequences and wanted to control 2 Sbricks by 1 sequence button. The all-day SBrick is fine. He...  moreOkay, let me tell you the complete story.Last year i bought 2 SBricks. 1 was always in use and up to date. With the new App for iOS I started setting up some sequences and wanted to control 2 Sbricks by 1 sequence button. The all-day SBrick is fine. He got the Update 12 and is Hardware 4. (updated with the new iOS App, which is very cool)The second SBrick was sealed until yesterday. He has the firmware from 1 year ago and wanted to update him. So I powered him with a battery box. Then he was visible in the "My Sbricks" Menu in the App. I clicked on this SBrick. All 4 parameters (Temperature, Volt, Hardware, Firmware) had no number, all just were shown as 0. (Picture 1 shows this)
  Then I tried to update this SBrick by clickung on "update Firmware", but this doesnt work. Just a Pop-up told me, my SBric kwould have the newest Firmware... But the temperature etc. had no value, just shown as 0...
  Reboot and Restart of the App doesnt help.
  Best Regards!
     less

  • August 4, 2016
• 
  Rik Lachmann posted a topic in the forum Support:

  Cant Update Sbrick

  Hey,
  I have a second SBrick, which was packed until now. Now I want to use and update him, but I cant... Hardware and Firmware Version shown as 0... Using iPhone 6
  Hope you can help me...
   
  Best regards

  • August 4, 2016
• 
  Rik Lachmann posted a topic in the forum Support:

  Control Delay

  Hey,
  when I'am using my SBrick to drive a car, after 5 sec. full pedal and different steering commands I have a huge delay. So when I stop pushing forward, the motor doesnt stop instant, he stops after 1 second... Same for the steering, when I let the...  moreHey,
  when I'am using my SBrick to drive a car, after 5 sec. full pedal and different steering commands I have a huge delay. So when I stop pushing forward, the motor doesnt stop instant, he stops after 1 second... Same for the steering, when I let the servo go to center, he doesnt go there instant, he needs one second, and then he does...
  This wasnt there before the new APP (iOS)...Hope you can fix it!
   
  Best regards  

  • August 4, 2016
• 
  Rik Lachmann replied to a topic in the forum Support:

  Hey,
  I just saw a video on YT (https://www.youtube.com/watch?v=Y9h49WccF5c) were somebody controlled first every motor with one slider each. Then he controled all motors with one sequence button together. I tried to do the same, but I just can control...  moreHey,
  I just saw a video on YT (https://www.youtube.com/watch?v=Y9h49WccF5c) were somebody controlled first every motor with one slider each. Then he controled all motors with one sequence button together. I tried to do the same, but I just can control every SBrick Port by one Button or Slider. (iOS App) So I have to decide, controlling with sliders or sequence button. For me its not possible to build trafficators and hazard flashrs with just to pairs of LEGO LEDs; I would need 4 pairs...
   
  Thanks!  less

  • July 27, 2016
• 
  Rik Lachmann → Philipp Kaufmann: Hey,
  
  thanks for answer. How can you help...  moreHey,
  
  thanks for answer. How can you help me?
  
  Best regards
  Rik  

  • November 8, 2015
• 
  Rik Lachmann → Jörg Knudsen: Hey,
  thank you! How can you help me?
  
  Rik

  • November 8, 2015
• 
  Philipp Kaufmann: Hi,
  you asked for that blinker-feature some time ago.
  Maybe i can help.
  best regards
  Philipp

  • November 7, 2015
• 
  Rik Lachmann replied to a topic in the forum Support:

  Oh, thats very nice!
  Thank you for help, this feature will be great!
  
  Rik

  • July 10, 2015
• 
  Rik Lachmann posted a topic in the forum Support:

  Car blinker

  Hey guys,
  I want to build a very realistic car with a blinker (blinking lights on left and rigth side). But I dont know how to add this function to my profile in the profile designer... (like the S-Brick Version of the 42030 Volvo wheelloader has)
  Thank...  moreHey guys,
  I want to build a very realistic car with a blinker (blinking lights on left and rigth side). But I dont know how to add this function to my profile in the profile designer... (like the S-Brick Version of the 42030 Volvo wheelloader has)
  Thank you for answer!
  Rik  

  • July 8, 2015
• 
  Rik Lachmann → Rio Lachmann: Hello Rio,
  what up?

  • July 8, 2015
• 
  Rik Lachmann has just signed up. Say hello!

  • July 8, 2015