Updates

• 
  Alex Nodge → U.S.A Sbrick Fans: Hey guys since you all live in the U.S.A. it is finally summer!!!!!!! Please share some more pics of your summer mocs.

  • June 17, 2016

  • Balint Mezei and Alex Nodge like this.
  • 
    Peter Subert Hey Alex,
    I have not seen much activites in this group (yet), but I am sure, there is a huge potential to share one's MOC ideas with SBrick - at least based on how many customers I have in the States - . I am thinking of encouraging our group activity...  moreHey Alex,
    I have not seen much activites in this group (yet), but I am sure, there is a huge potential to share one's MOC ideas with SBrick - at least based on how many customers I have in the States - . I am thinking of encouraging our group activity with a promotion before Christmas to ask people to send in pics of their MOCs and I would sponsor the most three voted ones with valuable SBrick prizes. Would you be willing to promote this idea among your friends? Any thoughts would be much appreciated. Thanks, Peter (www.brickpowerllc.com)  less

    • November 2, 2016
• 
  Alex Nodge → U.S.A Sbrick Fans: can sbrick handel 11.1 v?

  • June 6, 2016

  • 
    Balint Mezei Hello!
    
    It can only handle between 4V - 10.8V....  moreHello!
    
    It can only handle between 4V - 10.8V.
    
    Regards,
    
    Balint Mezei - SBrick Team  

    • June 7, 2016
  • 
    Lénárd Pásztor It is not much difference, you can try it.

    • June 9, 2016
• 
  Alex Nodge → U.S.A Sbrick Fans: https://www.google.com/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#tbm=shop&q=scale+car+2s+9V+1500+milliamp+hours+lipo+batteries&spd=14167586403615102834

  • June 6, 2016
• 
  Alex Nodge → U.S.A Sbrick Fans: https://www.google.com/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#tbm=shop&q=scale+car+2s+9V+1500+milliamp+hours+lipo+batteries&spd=14167586403615102834
  
  
  this is a web address to a 2 cell 7.4V 1600Mah and a 20c discharge 
  is this power too...  morehttps://www.google.com/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#tbm=shop&q=scale+car+2s+9V+1500+milliamp+hours+lipo+batteries&spd=14167586403615102834
  
  
  this is a web address to a 2 cell 7.4V 1600Mah and a 20c discharge 
  is this power too high for sbrick?  less

  • June 6, 2016
• 
  Alex Nodge → Balint Mezei: what discharge rate is too high for sbrick. is 35c?

  • June 5, 2016

  • 
    Franciscus van der Maat As far as I am aware it doesn't quite work that way. A discharge rate like 35C says something about the maximum discharge rate of a specific battery. It says nothing about the amount of current that is actually discharged, because that depends on the...  moreAs far as I am aware it doesn't quite work that way. A discharge rate like 35C says something about the maximum discharge rate of a specific battery. It says nothing about the amount of current that is actually discharged, because that depends on the draw of the attached components and the Ah of the battery in question. As far as I am aware the max current that the Sbrick can handle is 6A, with max 3A per channel. In theory the 3A per channel would come down to 12A but I've heard that the PF wiring won't be able to handle that amount of current.  less

    • June 7, 2016
    • -
    • 2 like this
• 
  Alex Nodge → U.S.A Sbrick Fans: Ok that is what i thought but can i run a hobby grade lipo on s brick. I'm trying to find a good hobby grade lipo about  8.5v-9v and 1500 milli amp hours. can sbrick handle hobby grade 9V.

  • June 5, 2016

  • 
    Balint Mezei Yes, it can handle 9V.

    • June 6, 2016
• 
  Alex Nodge → U.S.A Sbrick Fans: i also have one more question. can i run dual lego lipo on 1 sbrick.

  • June 4, 2016

  • 
    Balint Mezei Perhaps it is better way, if you use dual lipo with two different SBrick.

    • June 5, 2016
• 
  Alex Nodge → U.S.A Sbrick Fans: I have a problem with my new moc. it is a baja trophy truck with rwd, positive camber front suspension,rear suspension is live axel, sbrick (1), dual buggy motors,and a lockable diff, and finally the lego train lipo (only one) on separate sbrick...  moreI have a problem with my new moc. it is a baja trophy truck with rwd, positive camber front suspension,rear suspension is live axel, sbrick (1), dual buggy motors,and a lockable diff, and finally the lego train lipo (only one) on separate sbrick channels. When i try to drive i can give it about 50-75% power and sometimes it drives fine but when i try to give it full power or sometimes just try to accelerate fast it will go to full speed and stay there for like 1/2 a second and then it will do this stall thing and it will make the speed go back to neutral and then you cant give it power for like 1 second. Is this because i am only running 1 lipo?  less

  • June 4, 2016

  • 
    Balint Mezei Hello Alex! Yes, the solution is to use stronger battery. The RC Buggy motor uses a lots of power. I hope i could helped to you! Best wishes, Balint Mezei - SBrick Team

    • June 5, 2016
• 
  Alex Nodge → U.S.A Sbrick Fans: hey guys I love that my group is growing and that is great but id like you guys to be a bit more active, the whole point of starting this group was to share and help fans wits moc's. 

  • June 4, 2016

  • Balint Mezei likes this.
• 
  Tamas Misik is now friends with Alex Nodge.

  • February 9, 2016
• 
  Alex Nodge → U.S.A Sbrick Fans: Hi guys i'm hoping this group/club will grow to most us Sbrick members we will share ideas of MOC's and different systems.

  • December 22, 2015
• 
  Alex Nodge created a new group:

  

  U.S.A Sbrick Fans

  This is a group for Technic Sbrick users in the U.S.A.

  • December 22, 2015

  • Lénárd Pásztor likes this.
• 
  Alex Nodge → Profile suggestions - Offical Group: i tried to make the profile but it will show up and will connect but wont drive

  • December 22, 2015
• 
  Alex Nodge → Profile suggestions - Offical Group: Hi, I was wondering if someone wanted to help me make a profile for a car with differential drive with 2 different motors and steering.

  • December 22, 2015

  • Tamas Misik likes this.
  • 
    Tamas Misik Hi Aley,
    What kind of help do you need? You can create your own profiles at: https://designer.sbrick.com/

    • December 22, 2015
• 
  Alex Nodge → Profile suggestions - Offical Group: Hi

  • December 22, 2015
• 
  Alex Nodge joined the group Profile suggestions - Offical Group

  • December 22, 2015
• 
  Alex Nodge has just signed up. Say hello!

  • September 2, 2015