Updates

• 
  K Tom commented on Fabrice Bovy's photo.

  

  Hi,
  I made some simple tests with the new SBrick Light and I find a bug...
  When I use 2 buttons to trigger set color X in Y seconds on 2 different ports (H and G):
  - Button on port H set color green in 5...  moreHi,
  I made some simple tests with the new SBrick Light and I find a bug...
  When I use 2 buttons to trigger set color X in Y seconds on 2 different ports (H and G):
  - Button on port H set color green in 5 seconds
  - Button2 on port G set color red in 5 seconds.
  When I click on Button, the led on port H shades on green but when I click on Button2 before it ends, I mean before the 5 seconds, the led on port G shades on red and the led on port H turns to green with orange...
  When I do the opposite, click on Button2 then on Button, the led on port G turns off and the les on port H shades to green correctly.
  However, if I wait for the 5 seconds, everything works perfectly.
  Hope my explanation is clear enough  less

  • May 18, 2021

  • 
    K Tom Hello!
    Please restart the app with internet connection, and try again!
    We fixed it! Thank you!

    • May 18, 2021
  • 
    Fabrice Bovy I would like to test it but I can't... my 2 SBrick Light are unusable due to a crash during last firmware update... still awaiting a solution

    • May 18, 2021
• 
  K Tom replied to a topic in the forum Support:

  David Low said:
  Latest update has actually made it worse, now the app won't connect to the SBrick at all, sees the rick but just sits there with the spinning graphic.
   
  
  Hello! Please restart the mobile device, sometimes the BLE caches some meta infos.

  • September 7, 2019
• 
  K Tom replied to a topic in the forum Support:

  Hello Antoni, Alf!
  We checked on lot of devices, and we seen lot of logs, but could not found where is the problem.
  Couldn't you move the knob to the two sides? How can't you move it? What does happen, if you exchange the positions of the sliders?
  Can...  moreHello Antoni, Alf!
  We checked on lot of devices, and we seen lot of logs, but could not found where is the problem.
  Couldn't you move the knob to the two sides? How can't you move it? What does happen, if you exchange the positions of the sliders?
  Can you make please a video about that?
  Thank you very much!
  KTom
     

  • April 24, 2019
• 
  K Tom replied to a topic in the forum Support:

  Mark Singleton said:
  
  Thanks for this Mark, your video shows exactly the same functionality im experiencing, on the same app version. Have also deleted and reinstalled many times. The bug used to be intermittent so I do have some profiles set up, and...  moreMark Singleton said:
  
  Thanks for this Mark, your video shows exactly the same functionality im experiencing, on the same app version. Have also deleted and reinstalled many times. The bug used to be intermittent so I do have some profiles set up, and dont want to lose them by reinstalling again. 
  
  Thank you Jayden.
  
   
  Dear Mark, Jayden,
  Restart the app, please, i turned on the logs, hopefully i will see the problem.
  Thank you! KT  

  • October 25, 2018
• 
  K Tom replied to a topic in the forum Support:

  Galim Makhmutov said:
  Hello, it is me again.I have tested several version of SBrick App. I tested the latest one 4.4.7, the first version with gamepad support 4.4.2 and the latest version 4.2.3 without gamepad support. SBrick FW is 20.I used legal...  moreGalim Makhmutov said:
  Hello, it is me again.I have tested several version of SBrick App. I tested the latest one 4.4.7, the first version with gamepad support 4.4.2 and the latest version 4.2.3 without gamepad support. SBrick FW is 20.I used legal ways to downgrade SBrick App using iTunes and Charles.The result if following: version 4.2.3 is working flawless and without crashes. Perfect. But it doesn't support gamepad which I really need to use. I tested it for 10+ minutes several times and it didn't crash.Version 4.4.2 and 4.4.7 are unstable and they crash whenever they want to. May be 15 seconds, may be 2 minutes after starting the profile, but the result is the same, the App crashes.So, something went wrong with App version 4.4.2.I remind, I am using iPhone 5 with iOS 10.3.3.I really hope that this will help.Do you need some more test? I will help gladly with anything I can. 
  
   
   
  Dear Galim!
  We are working on the new version what hopefully will fix your crash...    less

  • November 30, 2017
• 
  K Tom replied to a topic in the forum Support:

   
  Legomania said:
  Hello SBrickers,
  since I upgraded one of my SBricks to firmware 20 (hardware 5), the App does not connect anymore to the SBrick. The SBrick is recognized (available in the list of SBricks) but when selected it never exits : see...  more 
  Legomania said:
  Hello SBrickers,
  since I upgraded one of my SBricks to firmware 20 (hardware 5), the App does not connect anymore to the SBrick. The SBrick is recognized (available in the list of SBricks) but when selected it never exits : see image.
  I'm using SBrick v4.4 Update 7 under iOs 11.1.2. 
  Any idea ? 
   
  
  
   
   
  Dear LegoMania!
  I checked your logs, seems the Bluetooth of your device has been crashed or cached some service ids.
  Please reboot your mobile device and try again!The bluetooth restart is not enough, only the full device reboot helps.
  Does it help?
  KTamas  less

  • November 30, 2017
• 
  K Tom has just signed up. Say hello!

  • November 30, 2017