Updates

• 
  Marek Klajman liked Fabrice Bovy's photo.

  

  Hi Lénárd Pásztor,
  after having replied on the post of Marek Klajman, I did some more test with the event "When voltage change value" and it does not work. I can show the calculated percentage on "On Start" but the value never change via "When...  moreHi Lénárd Pásztor,
  after having replied on the post of Marek Klajman, I did some more test with the event "When voltage change value" and it does not work. I can show the calculated percentage on "On Start" but the value never change via "When voltage change value". I ran a 2 train motors for 5 minutes and the value never changes, however after stopping and restarting the project, the shown value has changed but not in "live"...
  Can you have a look ?
  Thanks.  

  • May 5, 2021

  • Marek Klajman and Hambone like this.
  • 
    Lénárd Pásztor Thanks for reporting this. We are on the fix.

    • May 10, 2021
• 
  Marek Klajman → Coding app beta test: Hello boys, one more questions. Is it possible to add battery status/voltage from battery box? In classic sbrick app is it possible.

  • May 1, 2021

  • 
    Lénárd Pásztor Yes, you can found them in the vitual ports.

    • May 1, 2021
  • 
    Marek Klajman I´ve got it, thanks for your help.

    • May 1, 2021
  • 
    Marek Klajman One more issue, it´s working on PC with Windows, but when I try it on Android devices voltage is showing only 0. I´m using ON START+FOREVER DO+CAPTION SET TEXT+VOLTMETER VOLT? Is it correct??

    • May 2, 2021
  • 
    Fabrice Bovy Hi, same remark, use "caption set text" = "Volmeter volt" on "On start" and on event "When voltage change value".
    Always try to avoid loops

    • May 5, 2021
  • 
    Marek Klajman I think, that it´s problem on adroid device. Because on my laptop works all combination with voltage, but on my cell phone it´s always showing 0. I´ll try on another device.

    • May 5, 2021
• 
  Marek Klajman → Coding app beta test: Once again picture in english. Hope this will help.

  

  • April 19, 2021

  • Hambone likes this.
  • 
    Marek Klajman Whatever I try, it looks that it´s not possible to have two slider with different settings to control one motor. I would like to have one slider to control extending boom together with unwinding rope. But also have another slider to control rope drum separatly.

    • April 20, 2021
  • 
    Lénárd Pásztor I see that you update the motor status from multiple loops, so this is why it is not working. You need to modify your code to make sure that the motor receiving value from one slider at a time.

    • April 21, 2021
  • 
    Marek Klajman I´ve find solutions, I´m not using slider, but buttons - not that clean solutions as I thought, but it´s working. If you will find time to try, please show me what you mean.

    • April 21, 2021
  • 
    Fabrice Bovy Hi, you should use events instead of loops...
    Try with "When ... controller change value" in dark green blocks

    • April 22, 2021
    • -
    • 1 likes this
  • 
    Marek Klajman Yap, thanks for good tip. It works,

    • May 1, 2021
    • -
    • 1 likes this
• 
  Marek Klajman → Coding app beta test: Hello everyone, I´ve just start exploring new Sbrick Pro app possibilities and I´m so amazed. But I´m newbie in this kind of programming/coding. I´d like ask you for some help. I have Lucio Switch crane trucks with 4 Sbricks. My goal is:...  moreHello everyone, I´ve just start exploring new Sbrick Pro app possibilities and I´m so amazed. But I´m newbie in this kind of programming/coding. I´d like ask you for some help. I have Lucio Switch crane trucks with 4 Sbricks. My goal is: extending/retracting boom with two winches uwinding at the same time with one slider. But also have capability to control both winches with separate slider. At this time I have this. But it´s not working properly. Extending/retracting is working, but separate sliders for two winches not. Is here someone who can help. Thanks for any suggestion.
  EDIT: To creator - is it even possible to have two slider to control one output/one motor - e.g. one slider for simultaneously operate two motors and second slider for only one of that two??  less

  • April 18, 2021
  • - edited

  • 
    Lénárd Pásztor Hi! I think it is possible. Can you create the screenshots in english?

    • April 19, 2021
  • 
    Marek Klajman I don´t know how, program jump automaticly to czech language and I can´t see where it can be changed.

    • April 19, 2021
  • 
    Lénárd Pásztor You can change it in the main screen when you click on your profile picture.

    • April 19, 2021
• 
  Marek Klajman joined the group Coding app beta test

  • April 18, 2021
• 
  Marek Klajman replied to a topic in the forum Support:

  Hello there. I´m new here. First trying with Profile Designer. And I would like to ask. Is there some kind options to add text labels for my slider and buttons? Saw severals others custom made profiles, which had text above slider or on it. Please...  moreHello there. I´m new here. First trying with Profile Designer. And I would like to ask. Is there some kind options to add text labels for my slider and buttons? Saw severals others custom made profiles, which had text above slider or on it. Please can you give me some advice? Thank you.  

  • October 18, 2019
• 
  Lothar Weigl: Welcome to SBRICK! Have lot of fun!

  • October 17, 2019