Updates

• 
  Hambone replied to a topic in the forum Support:

  As of today 10/26 the software for Sbrick Pro App is still available and working. I presume it will go away if in fact they are out of business. Does anyone know of alternative software that will run Sbrick/ Sbrick Plus hardware?

  • October 26, 2023
• 
  Hambone → Coding app beta test: Receive "502 Bad Gateway" when trying to access https://pro.sbrick.com/ from desktop

  • October 3, 2022
• 
  Hambone liked Fabrice Bovy's photo.

  

  Hi Lénárd Pásztor,
  after having replied on the post of Marek Klajman, I did some more test with the event "When voltage change value" and it does not work. I can show the calculated percentage on "On Start" but the value never change via "When...  moreHi Lénárd Pásztor,
  after having replied on the post of Marek Klajman, I did some more test with the event "When voltage change value" and it does not work. I can show the calculated percentage on "On Start" but the value never change via "When voltage change value". I ran a 2 train motors for 5 minutes and the value never changes, however after stopping and restarting the project, the shown value has changed but not in "live"...
  Can you have a look ?
  Thanks.  

  • June 2, 2021

  • Marek Klajman and Hambone like this.
  • 
    Lénárd Pásztor Thanks for reporting this. We are on the fix.

    • May 10, 2021
• 
  Hambone liked Marek Klajman's photo.

  

  Once again picture in english. Hope this will help.

  • April 20, 2021

  • Hambone likes this.
  • 
    Marek Klajman Whatever I try, it looks that it´s not possible to have two slider with different settings to control one motor. I would like to have one slider to control extending boom together with unwinding rope. But also have another slider to control rope drum separatly.

    • April 20, 2021
  • 
    Lénárd Pásztor I see that you update the motor status from multiple loops, so this is why it is not working. You need to modify your code to make sure that the motor receiving value from one slider at a time.

    • April 21, 2021
  • 
    Marek Klajman I´ve find solutions, I´m not using slider, but buttons - not that clean solutions as I thought, but it´s working. If you will find time to try, please show me what you mean.

    • April 21, 2021
  • 
    Fabrice Bovy Hi, you should use events instead of loops...
    Try with "When ... controller change value" in dark green blocks

    • April 22, 2021
    • -
    • 1 likes this
  • 
    Marek Klajman Yap, thanks for good tip. It works,

    • May 1, 2021
    • -
    • 1 likes this
• 
  Hambone Hello, The distance sensors all 3 of them) are not working on my Android Phone (Version 10).The sensors are working fine for the same project run from my Microsoft desktop. I am using the latest Sbrick software version (...  moreHello, The distance sensors all 3 of them) are not working on my Android Phone (Version 10).The sensors are working fine for the same project run from my Microsoft desktop. I am using the latest Sbrick software version (https://download.sbrick.com/sbrickpro/sbrick.pro.test-4.6.9-314.apk).  

  • January 12, 2021

  • View all 6 comments
  • 
    Hambone Auto Train Switching is the project name.

    • January 12, 2021
  • 
    Hambone Hello,
    Has someone been able to look at my above issue?
    Thanks

    • January 19, 2021
  • 
    Lénárd Pásztor I'm on it, sorry for the delay.

    • January 20, 2021
  • 
    Hambone Hello,
    Has there been any progress on my issue?
    Thanks

    • February 8, 2021
  • 
    Lénárd Pásztor Yes. We can reproduce the problem. We also work some other fixes and a version with support for SBrick Light. We also do the fix with the new release for this issue too.

    • February 8, 2021
• 
  Hambone → Coding app beta test: Hello,
  
  I am not able to get the sbrick pro application to find any
  of my Sbricks. Using "https://pro.sbrick.com" when clicking on
  the red "Hubs" button in the right hand corner of the main menu there
  appears a screen...  moreHello,
  
  I am not able to get the sbrick pro application to find any
  of my Sbricks. Using "https://pro.sbrick.com" when clicking on
  the red "Hubs" button in the right hand corner of the main menu there
  appears a screen that states "There is no connection to the driver. Download
  the free drivers" with a link to "http://sbrick.dewsys.com/windriverProBeta/install"
  which does not work. So I clicked on my project and clicked on the red button
  in the left hand corner of the project screen and received the same message as
  described above except it states to go to "https://www.sbrick.com/education".
  When going to that link I went to the bottom of the site and downloaded the scratch
  plug-in "For Windows 7+". I downloaded and installed the software but
  still cannot get my Sbricks to link with the pro application. I am running on a
  Windows 10 desktop. Just a note I was able for several months to run the pro
  app sucessfully from the same desktop using link http://sbrick.dewsys.com, whick I was told
  should not be...    less

  • December 23, 2020

  • 
    Lénárd Pásztor Please uninstall the scratch driver, the pro driver and the scratch driver can't work simultaneusly. You can install the win driver from here: https://download.sbrick.com/windriver/

    • December 25, 2020
• 
  Hambone → Lénárd Pásztor: Hello, I have been getting the following
  message when attempting to go to your website :
  https://sbrick.dewsys.com/sbrick.pd/. Wondering if you are aware of other
  people having the same issue.
  
  "Dangerous Webpage Blocked You attempted to
  access: ...  moreHello, I have been getting the following
  message when attempting to go to your website :
  https://sbrick.dewsys.com/sbrick.pd/. Wondering if you are aware of other
  people having the same issue.
  
  "Dangerous Webpage Blocked You attempted to
  access: https://sbrick.dewsys.com/sbrick.pd/ This is a known dangerous webpage.
  It is highly recommended that you do NOT visit this page."
  
  Thanks  less

  • December 3, 2020

  • 
    Lénárd Pásztor hi! please use https://pro.sbrick.com

    • December 21, 2020
• 
  Hambone → Lénárd Pásztor: Cannot find Android version 4.6.5 release in the Google play store . Latest version is 4.6.3.

  • March 20, 2020

  • 
    Lénárd Pásztor Yes, we are in discussion with Google support. They suddenly found our app violates with LEGO brand..

    • March 24, 2020
• 
  Hambone → Lénárd Pásztor: The sensors now work with the developer build link (4.6.3-233). Thank you!

  • March 14, 2020
  • - edited

  • 
    Lénárd Pásztor Hi! we pushed a new android release to the play store with version 4.6.5. Please test that release, thanks!

    • March 16, 2020
• 
  Hambone replied to a topic in the forum Support:

  The motion sensors now work with the code build that you sent in the link.
  Thank you
   

  • March 14, 2020
• 
  Hambone replied to a topic in the forum Support:

  Any progress on the fix for this issue with losing the use of motion sensors?

  • February 20, 2020
• 
  Hambone joined the group Coding app beta test

  • February 20, 2020
• 
  Hambone replied to a topic in the forum Support:

  Is it possible for the Sbrick Android App to send and receive commands with an ESP32 micro computer through it's bluetooth module?

  • February 19, 2020
• 
  Hambone replied to a topic in the forum Support:

  Tamás Fábián said:
  Hello Hambone,
  we managed to reproduce the problem and working on a...  moreTamás Fábián said:
  Hello Hambone,
  we managed to reproduce the problem and working on a fix.
  Cheers,
  Tamas
  
  Any update on the fix for this issue ?
  Thanks   

  • January 19, 2020
• 
  Hambone replied to a topic in the forum Support:

  • January 19, 2020
• 
  Hambone replied to a topic in the forum Support:

  Hello,
  I have an Sbrick Plus with 2 motion sensors (9583) that used to work (been working for several months) but as of Novenber 30th stopped working. The same Sbrick has two motors attached which are working. The Sbrick app is V4.6 Update 3. The Sbrick...  moreHello,
  I have an Sbrick Plus with 2 motion sensors (9583) that used to work (been working for several months) but as of Novenber 30th stopped working. The same Sbrick has two motors attached which are working. The Sbrick app is V4.6 Update 3. The Sbrick is Hardware version 11, Firmware version 25. My phone is Android version:9, Current vrsion:PDOS29.114-134-4, Security patch level:Octover 1,2019. Is it possible that the app has recently changed?
  Thanks  

  • December 3, 2019
• 
  Hambone replied to a topic in the forum Support:

  Is it possible to detect a particular train passing by a motion sensor with the current Sbrick technology? Ultimately, I want to use a color sensor with trains having a few different colored bricks as unique identifiers to do the job, however, not sure...  moreIs it possible to detect a particular train passing by a motion sensor with the current Sbrick technology? Ultimately, I want to use a color sensor with trains having a few different colored bricks as unique identifiers to do the job, however, not sure when the ev3 sensor adapter will be available.  Has anyone out there tried something similar using the current Sbrick technology?  

  • October 23, 2019
• 
  Hambone replied to a topic in the forum Support:

  Hello,
  I have an example (https://designer.sbrick.com/?profile=35879 ) of an issue where a control (button) is added to an existing profile and after it is saved and edited again the button disappears from the profile. This is not an isolated issue as...  moreHello,
  I have an example (https://designer.sbrick.com/?profile=35879 ) of an issue where a control (button) is added to an existing profile and after it is saved and edited again the button disappears from the profile. This is not an isolated issue as this has happened to several of my profiles. There seems to be a limit to the number of controls on a profile. There doesn't seem to be a limit to the number of controls that can be initially added to the profile, but when it is saved and edited again some of the controls disappear. In this example Firefox is the browser used, however,  using Chrome or IE has the same result. See below screen shots.
  
   
     less

  • August 29, 2019
• 
  Hambone replied to a topic in the forum Suggestions:

  Hi,
  Would it be possible to get a sneak preview of the profile designer interface for the ev3 adapter for sensors, how it looks and setup options?
  Thanks

  • August 22, 2018
• 
  Hambone replied to a topic in the forum Support:

  I accidentally deleted the background from a profile and not able to add it back. Is there a way to add a "Background" to an already existing profile. I have replaced backgrounds but in this case there is no background object in the "Controls". Profile...  moreI accidentally deleted the background from a profile and not able to add it back. Is there a way to add a "Background" to an already existing profile. I have replaced backgrounds but in this case there is no background object in the "Controls". Profile is https://designer.sbrick.com/?profile=29072'  

  • July 7, 2018
• 
  Hambone replied to a topic in the forum Support:

  Zsolt Szrapkó said:
  Hambone said:
  Does anyone know what the maximum number of objects (pictures/controls/sequences) allowed for a profile? I seem to have hit the maximum. I add a picture and a control and save it, but when I edit the profile from...  moreZsolt Szrapkó said:
  Hambone said:
  Does anyone know what the maximum number of objects (pictures/controls/sequences) allowed for a profile? I seem to have hit the maximum. I add a picture and a control and save it, but when I edit the profile from the home page the picture is gone and control attributes are not there. The maximum seems to be around 40?  I have sequences each with multiple channels plus two train engine controls (see picture below). Given that there is a maximum is there a way around it?
  
  
  Hi Hambone! Actually we doesn't setted a maximum quantity for the control elements nor to the channels – it's seems like a bug. If you're sends me a profile ID, i will check it out.
  
          Hi Zsolt,
          Profile https://designer.sbrick.com/?profile=33755 is an example where objects disappear. Sequence #14
          had channels defined , the profile was saved, the home page  was clicked and...    less

  • July 7, 2018
• 
  Hambone replied to a topic in the forum Support:

  Hi Zsolt,
  Thanks for looking at this issue.
  Profile (https://designer.sbrick.com/?profile=33755). Browser is Firefox. 
  Sequence of...  moreHi Zsolt,
  Thanks for looking at this issue.
  Profile (https://designer.sbrick.com/?profile=33755). Browser is Firefox. 
  Sequence of events:
  1. Edited profile with a new sequence #13 containing two events.
  2. Saved profile to home page (it is the first profile on home page).
  3. Edited the profile. The name for sequence #13 is missing as well as the two events.
  Screen shots are below for above events.
  1. Edited profile with a new sequence #13 containing two events:
  
  2. Saved profile to home page (it is the first profile):
  
  3. Edited the profile. The name for sequence #13 is missing as well as the two events:  less

  • May 10, 2018
• 
  Hambone replied to a topic in the forum Support:

  Does anyone know what the maximum number of objects (pictures/controls/sequences) allowed for a profile? I seem to have hit the maximum. I add a picture and a control and save it, but when I edit the profile from the home page the picture is gone and...  moreDoes anyone know what the maximum number of objects (pictures/controls/sequences) allowed for a profile? I seem to have hit the maximum. I add a picture and a control and save it, but when I edit the profile from the home page the picture is gone and control attributes are not there. The maximum seems to be around 40?  I have sequences each with multiple channels plus two train engine controls (see picture below). Given that there is a maximum is there a way around it?  

  • May 5, 2018
• 
  Hambone replied to a topic in the forum Support:

  Hi,
  Peter, thanks for replying to my last post. 
  I have successfully used a circuit object and a motion sensor to trigger motorized train track switches that are setup in a sequence object. Is it possible to trigger different sequence objects...  moreHi,
  Peter, thanks for replying to my last post. 
  I have successfully used a circuit object and a motion sensor to trigger motorized train track switches that are setup in a sequence object. Is it possible to trigger different sequence objects depending on how many times the train passes the motion sensor? For example,  on odd numbered passes trigger the sequence for switch 1 and for even number of passes trigger another sequence for switch 2?.
  Thanks  

  • February 27, 2018
• 
  Hambone replied to a topic in the forum Support:

  Not able to delete two circuit object handlers from a profile. Able to delete the objects from the profile initially, but after saving the profile, then going back to the Home page and editing the same profile, the objects are back on the profile...  moreNot able to delete two circuit object handlers from a profile. Able to delete the objects from the profile initially, but after saving the profile, then going back to the Home page and editing the same profile, the objects are back on the profile layout. 
   
   
     

  • February 20, 2018
• 
  Hambone has just signed up. Say hello!

  • December 4, 2017