[blockquote]Caoimhin Marsh said:
I have the exact same problem as Justin, iPhone 4s and an android device that doesnt work well yet with sbrick
[/blockquote]
I am experiencing the same issue with my iPhone 4s: the calibration settings screen does not fit the screen of the phone (the Max Value can not be set). IOS 8.1.2
Hi sBrick Team,
I have finally received my kickstarter brick and also the extra items I have ordered! Great presents for 2015, thanks!!! All kudos to the whole team!!!
I have followed the installation steps and everything is working fine with my 4 x 4 Crawler set. The same time, I wanted to share my experience with you guys:
Only 2 profiles works with the sBrick and the lego set (see screenshot attached):
1. Joystick (Generic joystick controller with gyro sensors)
2. Gamepad 2 (Generic gamepad with two control)
I have headlights on the car, but they can not be individually controlled from the above profiles (unless I connect the light control to other channels). Other profiles that contain lights control, do not work with this set: be the remote control installed on the iPad2 or an iPhone 4S. IOS versions were: 8.+.
Also noticed, that the same profile (Gamepad 2) are different if installed on the iPad2 (no option for light control) or on the smartphone. Please see screenshots attached.
My questions are:
How can I add/modify the control profiles in order to exploit the 4 individual channels?
When will you add profiles that can control lights independently?
What skills does the user need to have to customize the control profile app?
Which control profile do you recommend for the MKII Crane set (I want to build the ultimate fully motorized version), where 8 channels will need to work individually and simultaneously from the same control profile?
At last, but not least about the packing: I suggest you attach the stickers (btw. I love them all!) onto a more solid plate, otherwise a single envelope does not protect the sticker sheet from getting wrapped and damaged. It happened to all my shipments, making some stickers useless:-(.
Waiting for your kind and quick answers, as I am preparing to demo soon with the Crawler and the Crane in a significant local robotic community.
Cheers,
Peter
Would you provide your SBrick connection status to the statistics thread I tried start ?
https://social.sbrick.com/forums/topic/68/device-sbrick-connection-compatibility-statistics/
It should not replace this one, just used for collecting pure statistics on which device type/model is generally connecting ok or not.
I have a question about the app, if I have a fourth gen ipod, will the Sbrick work with it, as I though I read somewhere it requires Bluetooth 4.0 and the ipod 4th gen lacks that and I have downloaded the app, but the app is recognizing the device as a Iphone 5 and the lower portion of the screen isn't visable. Could the app be optimized for the device, if the sbrick works with Bluetooth 2.1+ EDR? This is the only question that is keeping me from getting a Sbrick, if it will work with this device.
Sbrick app custom skins by Tommy Styrvoky, on Flickr
Though I did figure out how to make you own skins for the app
Sbrick app custom skins by Tommy Styrvoky, on Flickr
Hello,
Since the Sbrick requires bluetooth 4.0 or better, I would love to be able to use my iphone 4s with the app. I was wondering if the sbrick team could work on making some way for the app to adjust to the proper dimentions of the iphone 4s screen. For the most part the only trouble comes when fine tuning the profiles because its impossible to adjust the max range settings in the calibration. Since the Android app dosen't really work well, I'm stuck struggling to control my moc's with the iphone 4s, so I really need help with this. I love the products as I have just recieved my four sbricks today. I can't wait untill the apps are all working, and I hope you guys consider this idea. I also figure that being able to use my iphone 4s (My old phone) I could really save my main cell phones battery, so this would be a big help for me and anyone else with a iphone 4s as their main or older cell phone.
Thanks,
Justin
[blockquote]Wieger Offereins said:
Will it be possible to re-name my SBricks, in the future?
So I will be able to recognize them from a "distance"?
[/blockquote]
You can rename the briks in the App already. It's not 'pushed' to the brick, though, so deleting it and re-adding it will make it show up with the generic name, and so will it also on other devices..
[blockquote]Lénárd Pásztor said on 23 december:
Yes, it is a known bug with the current firmware. We already fixed it. OTA firmware upgrade will work the next release of the iOS app, then you can fix this issue by upgrading the app and the SBrick. The app is under Apple's review process, we hope they will put to public in next week.
[/blockquote]
As Sebastian quotes
[blockquote]sebastian madsen said: Hi.... i have an iPad air 2 With 8.1.2 iOS... But my iPad Can't find my Sbrick Wien i try to connect it... Then it's telling me that i have to wait for Bluetooth....[/blockquote]
I have the same problem. Bleutooth cannot find the SBrick
I posted this message on the Android part of the forum
[blockquote]Yesterday I resived my SBrick.
After powering on the SBrick the manual says the LED should turn on. I did not... I though is my SBRick broken.
But after 2 times re-installing the App my Samsung S5 I was able to operate the SBrick.
I found that the LED is working if your turn it on in the Manage Brick menu (identify led).
I installed the SBrick on my 41999 and only profile Gamepad 2 was working, except the speed control was working reverse.
I don't know who to reverse the output controls.
The Joystick does not work at all and the steering profiles do not react very well.
Gamepad 1 does not work at all, sometimes the app stoppes. Test 2 only shows 1 slider. So I probably have to re-install the app again..
I also installed the SBrick app on our IPAD (software 6.1.3.) and IPOD but both cannot find the SBrick....[/blockquote]
Is this related to the IPAD version (its an IPAD 2 software 6.1.3.)?
The motor stop when slider reaches the maximum is a problem from the latest SW version confirmed by SBrick team in this forum. It will be fixed in the next version.
Hi,
I got my SBrick today and have problems too. The LED of the SBrick can't be activated and the motor stops when I go with a channel up to maximum power, while the other motors keep running. Also the LEGO LED lights turn off when the slider is at maximum.
I tested the SBrick with different batteryboxes (AA and AAA) and different cables. I think it is a software problem.
The OTA function also doesn't work. The App crashes each time.
Tested on iPhone 6 and iOS 8.1.2
Hello,
i second Conchas ost from Dec. 22nd. I got an SBrick yesterday and put in my 42030. However i could not make it run from the iPad app since no profile was in the market. I tried it again today with my iPhone 4S, and there is a profile for it. This makes it rather complicated. The profiles should be independent from controller platform.
The second thing i ran into was the fact, that the function that once you hit the maximum power (slider to up most point) the motor stops. On the iPad app i could change this when creating a new profile, but i was not able to do this for a profile from the market (maybe i was to stupid to find it again).
3rd issue: Creating a profile for more than 2 function didn't work on the iPad. i could add a joystick an a slider but making it work idependently was not possible. Is there a tutorial?
So far for now - i should be able to explore the sBrick during the next days.
Merry Christmas to all of you!
TinkerBrick
Version 3.2 (15) / iPhone 5 / iOS 8.1.2
This might be not a specific iOS problem, even if it is really a problem.
But it is quite inconvinient at the minimum.
I'm using SBrick prototypes v3 and v4.1.
Recently I started to notice that connection to v4 is very hard to obatin when I start to work with my SBricks.
After sometime I realized that usually when working with these I've my iPhone 5 and Android Tablet nearby. So I found that v4 keeps connected on the tablet and iPhone can't connect to it. The same does not happen with v3 which connects to iPhone promptly.
The only solution I found to solve this, is to switch BT off in the tablet, so that I can have both SBricks on my iPhone and I can work with them.
This might be related with some firmware differences between both.
And I've not yet upgraded SBricks firmware via OTA, with the latest app version available on TestFlight. I'm afraid to lose them before the postman arrive with the definitive versions here...
Other behaviors I found:
- Very occasionally it gets not possible to connect to SBricks anymore. The only way I found to solve this is to kill SBrick app, swith BT off at iPhone, switch it back on and then launch the app again.
- After sometime use, the connection is also prone to get lost quite often. Although reconnection is possible to do manually (doesn't reconnect automatically), to have better stability and longer connection periods I must kill app and swith BT off/on.
Version 3.2 (15)
iPhone 5
iOS 8.1.2
Had difficulties to connect one of my SBricks. Maybe because it was also connected to the Android app.But also the other one was, and it connected to iPhone app easily. Had to shutdown power off Android tablet (turnig BT off might have worked also).
After this did not experienced anymore connection issues to the second SBrick (v4 prototype).
Besides this issue SBrick connection seems a lot more stable in this version.
I've in the market several profiles you made for me (3 for 8043, 2 for 8275).
It was one for iPad Mini and another for iPhone 5. The 3rd for 8043, I think it was a correction that ended in a ne profile. I can't test with iPad Mini anymore.
Since the names are identical this is quite confusing and testing is sometimes about trial and error to find the right profile.
When I get the iPad Mini profiles by mistake, they are too large and can't close them. Need to kill SBrick app to recover control.
Some do not show anything on screen anymore.
I believe you should rethink the profile management concept.
Better if can also have the same profile running on multiple devices, making it screen independent. Some automatic rescaling if possible/doable.
Wonder how it will work when we get profile designer and thousands of users (yes, I said thousands :D) adding new profiles to the market everyday.
Maybe they are available per user and only some pulished to everyone if the user so decides. Anyway they will grow "too much" to be easily manageable
Also something that should be easy and fast to implement. Display the app version somewhere from the home menu.
Just to make sure we easily know the version we are actually using.
Hello Enrico,
1-2) Official sets: yes, it's quite inconvenient and it doesn't make a lot of sense right now. This function will be replaced with something that's more useful and less annoying.
3) Good idea! Actually we already planning to (going to?) include certain custom profiles for a few advanced models.
4) Will investigate ;)
Thanks for the feedback, and your offer. We're counting on you guys :)
