Hello! Finally got my SBrick, like it so far. But it turned out that it doesn't work at all with SBrick.app on iOS 11.
On iOS 9 I have no issues: I see temperature, voltage, HW version (11) and SF version (18), firmware update says I have the latest version.
I can interact with all my L motors, Servos and LEDs without any issues.
But on iOS 11 (I tried 11.0.2 and 11.1 on different devices) I can see SBrick on the list of "My Sbrick" screen, but when I choose it shows "blank" screen, where there is no voltage, t, SF & HW version and sliders are not shown.
Is it a known issue that you're working on? Because iOS 11 now installed on more than 50% of all iOS devices..
Thanks.
[blockquote]Milan Hora said:
[blockquote]Balint Mezei said:
[blockquote]Milan Hora said:
In Sequence Editor are created intricate binding profile with Device's aspect ratio 16:9 for IPHONE 6. How this finished and debugging of the sequence to get Device's aspect ratio 4:3 to IPAD MINI 4?
[/blockquote]
Dear Milan,
Do you want to copy the profile you have created for the Iphone 6 (ratio, 16:9) to the Ipad mini (ratio, 4:3), am I right?
Unfortunately this is not possible yet, you have to create a new profile, for the 4:3 ratio again.
We are working on this function, but it is under developing yet. :(
If I was wrong, please tell us some further detail about the problem.
Have a nice day,
Balint
Sbrick Team
[/blockquote]
Do you want to tell me I have to write all the sequences for all the Ipad mini controls again? Can not copy the already written and debuged code? Are you serious ?
[/blockquote]
Dear Milan,
Unfortunately, at the moment it is the only way.
We are sorry about this problem. I just contacted our developers, if they could find a solution.
If there are news, I will forward it to you!
Have a nice day,
Balint
SBrick Team
[blockquote]Balint Mezei said:
[blockquote]Milan Hora said:
In Sequence Editor are created intricate binding profile with Device's aspect ratio 16:9 for IPHONE 6. How this finished and debugging of the sequence to get Device's aspect ratio 4:3 to IPAD MINI 4?
[/blockquote]
Dear Milan,
Do you want to copy the profile you have created for the Iphone 6 (ratio, 16:9) to the Ipad mini (ratio, 4:3), am I right?
Unfortunately this is not possible yet, you have to create a new profile, for the 4:3 ratio again.
We are working on this function, but it is under developing yet. :(
If I was wrong, please tell us some further detail about the problem.
Have a nice day,
Balint
Sbrick Team
[/blockquote]
Do you want to tell me I have to write all the sequences for all the Ipad mini controls again? Can not copy the already written and debuged code? Are you serious ?
[blockquote]Milan Hora said:
In Sequence Editor are created intricate binding profile with Device's aspect ratio 16:9 for IPHONE 6. How this finished and debugging of the sequence to get Device's aspect ratio 4:3 to IPAD MINI 4?
[/blockquote]
Dear Milan,
Do you want to copy the profile you have created for the Iphone 6 (ratio, 16:9) to the Ipad mini (ratio, 4:3), am I right?
Unfortunately this is not possible yet, you have to create a new profile, for the 4:3 ratio again.
We are working on this function, but it is under developing yet. :(
If I was wrong, please tell us some further detail about the problem.
Have a nice day,
Balint
Sbrick Team
[blockquote]Lars Böhme said:
Hello vengit,
March 1th I shared my issue with the crashin app. I am not the only one with this isse. Except the standard answer "we will take care..." nothing happened so far. The app still can't handle multible sequences in one profile.
I am very unsatisfied with the way ou handle software issues. Please solve the problems and stay in contact with your customers.
[/blockquote]
Dear Lars,
Thank you for your message. I have sent a message to our developers about the problem.
After the Easter Holiday, they will get back to us!
Sorry for the slow process, we do our best!
Have a nice day,
Balint
SBrick Team
Hello vengit,
March 1th I shared my issue with the crashin app. I am not the only one with this isse. Except the standard answer "we will take care..." nothing happened so far. The app still can't handle multible sequences in one profile.
I am very unsatisfied with the way ou handle software issues. Please solve the problems and stay in contact with your customers.
[blockquote]handokosetyawan said: Hi SBrick, I too have problem with my iphone 5 (ios 8.4.1) where the apps stuck at the loading page. It works well with my other phone (iphone 6) with the same sbrick.[/blockquote]
Hello,
Thank you for the report, we got some informations about this issue.
At the moment our developers try to find out what could be wrong with it.
They do their best to find the solution.
We ask for your patience,
Best regards,
Balint
SBrick Team
[blockquote]Trung Nguyen said:
[blockquote]Trung Nguyen said:
I am using 4.2.3 (same app on both phones) downloaded directly from appstore.
Using the same SBrick. I will retry it again tonight using identical method on both phones to see if anything has changed.
Yesterday, the app on iOS 8.x on my iPhone 5s just got stuck on "Loading..." as previously mentioned by a few others.
I'd recommend you add some "extra" information to next version of app to let user know what it's trying to load or what is preventing it from progressing to the main screen.
[/blockquote]
I have just retried again on both phones. iOS 10 worked, but not iOS 8.
From iPhone 7 I was able to get these details of the sbrick:
- Hardware version 5
- Firmware version 18.
I don't see how the sbrick hardware would have anything to do with the app starting up though, as iPhone 7 starts up without the sbrick even turned on.
[/blockquote]
It sounds interesting, thank you for the report. I will forward it to our developers.
They will check this!
Best regards,
Balint
SBrick Team
[blockquote]Trung Nguyen said:
I am using 4.2.3 (same app on both phones) downloaded directly from appstore.
Using the same SBrick. I will retry it again tonight using identical method on both phones to see if anything has changed.
Yesterday, the app on iOS 8.x on my iPhone 5s just got stuck on "Loading..." as previously mentioned by a few others.
I'd recommend you add some "extra" information to next version of app to let user know what it's trying to load or what is preventing it from progressing to the main screen.
[/blockquote]
I have just retried again on both phones. iOS 10 worked, but not iOS 8.
From iPhone 7 I was able to get these details of the sbrick:
- Hardware version 5
- Firmware version 18.
I don't see how the sbrick hardware would have anything to do with the app starting up though, as iPhone 7 starts up without the sbrick even turned on.
[blockquote]Balint Mezei said:
Hello,
It is interesting. It should work. Did you use the same SBrick?
Do you have the latest application on the 5s?
Regards,
Balint
SBrick Team
[/blockquote]
I am using 4.2.3 (same app on both phones) downloaded directly from appstore.
Using the same SBrick. I will retry it again tonight using identical method on both phones to see if anything has changed.
Yesterday, the app on iOS 8.x on my iPhone 5s just got stuck on "Loading..." as previously mentioned by a few others.
I'd recommend you add some "extra" information to next version of app to let user know what it's trying to load or what is preventing it from progressing to the main screen.
[blockquote]Trung Nguyen said:
Does the app not work with iOS 8.4 on iphone 5s?
It works fine on iphone 7 iOS 10.2.1
[/blockquote]
Hello,
It is interesting. It should work. Did you use the same SBrick?
Do you have the latest application on the 5s?
Regards,
Balint
SBrick Team
[blockquote]Timber Brick said:
Also, the resorce images are missing on the iphone. The controls show up as grey boxes on a black background. Perhaps the long download time is explained by a long delay until a timeout happens for each image resource.
[/blockquote]
Dear Timber,
We haven't experienced an issue like that before.
I use an Iphone 6, and the speed of download is just perfect (1-2 seconds).
Please reinstall the application and restart your device. Sometimes it solves the issues.
If after that there is something wrong again, please contact us at info@sbrick.com with further details, and if it is possible a video or pictures about the problem.
Best regards,
Balint
Sbrick Team
[blockquote]Randy Sluder said:
My background image will not appear on the screen of my iPhone 6 or in the SBrick design page (the screen is just black). I've tried both JPG and PNG. Please advise...
[/blockquote]
Hello,
The problem exist in the Profile Designer or in the application?
Regards,
Balint
SBrick Team
Thanks Balint. Here's some more details you can pass to your dev team:
I played around with the iPad some more last night and I found that the SBrick app would work if I turned off Restrictions (my kids use this iPad). I tried the same Restrictions on my iPhone and the SBrick app came up with no problem.
I'd like to be able to use the SBrick app on my iPad without turning off the Restrictions because disabling and re-enabling them whenever we use the app would be a huge hassle.
[blockquote]T L said:
Hi, I'm having an issue with the SBrick app on my iPad mini with iOS version 9.3.5. When I start up the app, it hangs on a whitescreen. I've tried restarting the iPad as well as removing and reinstalling the app but I still get the same behavior. The app works fine on my iPhone 5S with iOS 10.2. Has anyone else had this problem?
[/blockquote]
Hello,
Thank you for your report.
Our developers will check this!
We ask for your patience,
Best regards,
Balint
SBrick Team
Hi, I'm having an issue with the SBrick app on my iPad mini with iOS version 9.3.5. When I start up the app, it hangs on a whitescreen. I've tried restarting the iPad as well as removing and reinstalling the app but I still get the same behavior. The app works fine on my iPhone 5S with iOS 10.2. Has anyone else had this problem?