Forums » Support

Back To Topics

SBrick iOS App

    • 2 posts
    July 16, 2016 9:39 PM CEST
    I have a different problem besides the update erased all the configurations I have.
    My sbrick works as expected until I slide my finger to the top of the slider, in this position the motor stops. This happens with any control, any profile, any creation. This leaves the sbrick useless.
    I have an iPhone 6S with the last iOS update.
    • 3 posts
    July 16, 2016 2:49 PM CEST

    Why the new IOS APP have about 1 or 2 seconds delay? And Why I need reset all the settings?? When I test it, My car didn't work on my table at first. Then, I push again, it fall down from my table! That's not funny OK!? Please update again, and resolve the stupid problems. Now, all I need to do is change back to lego remote.

  • July 15, 2016 9:02 AM CEST

    My App on iPhone and iPad was updated automatically. Shit!!!

    What´s that shit? I have to do all my creations again?

    What as I didn´t note down the settings for my creations?

    That can´t be true!!!

    You could easyly give us all a hint to note down all settings.

    I have 13 motors and about 16 sets of LEDs in my Panther Fire Truck which are all connected to five sBricks.

    Now I have to set up all again? Wonderfull!!!!!!

    • 18 posts
    July 14, 2016 10:06 PM CEST

    Well, whoopie!! iOS sorted ... except it isn't!!!!!

    I have two almost identical trucks, both with Sbricks. One worked fine (before the update), one didn't. After having reinstalled the app, my profiles and settings, I now have a minor on/off switch problem with the truck that previously worked, which is annoying enough, but the second truck is a TOTAL DISASTER!

    Both the steering and acceleration continue active for two seconds after I take my finger off the slider, and it runs into things; it is completely undriveable. I had not intended to rebuild my truck quite this early in its life, but I am getting plenty of practice now. Oh, and guess what, the famous steering problem is still there .....

    You know, I've had enough. I've sat with this truck that won't go for four months, waiting for a fix from Vengt. I've converted it to Lego IR control and that's the way its going to stay. Vengt will be getting their Sbrick back with a demand for FULL repayment

     

    • 3 posts
    July 14, 2016 7:33 PM CEST
    [blockquote]Lénárd Pásztor said:

    [blockquote]Scott Woolridge said: New version downloaded from App Store. Have to start again as no profiles carried across, but initial impressions are good. Interface is different to old, but well thought out. Sequences now work and seems nice and stable. [/blockquote]

     

    Great news, thanks for the report!

    Have you tried the clinometer too?

    [/blockquote] Not yet, no profiles that use at minute.
    • 224 posts
    July 14, 2016 7:28 PM CEST

    [blockquote]Scott Woolridge said: New version downloaded from App Store. Have to start again as no profiles carried across, but initial impressions are good. Interface is different to old, but well thought out. Sequences now work and seems nice and stable. [/blockquote]

     

    Great news, thanks for the report!

    Have you tried the clinometer too?

    • 3 posts
    July 14, 2016 6:46 PM CEST
    New version downloaded from App Store. Have to start again as no profiles carried across, but initial impressions are good. Interface is different to old, but well thought out. Sequences now work and seems nice and stable.
  • July 13, 2016 4:20 PM CEST

    Thanks for the answer...

    I could read something about problems with the new version of the android-app. Should I be afraid because of the new version of the iOS-App?

    • 164 posts
    July 11, 2016 5:26 PM CEST

    Our developers finished the iOS app too! :)
    We have already sent to the Apple Store, so i will be available within 1-2 days. 

    We will post here if the new iOS app will be availalbe in the App Store. 
    Thanks for your patience, and stay tuned! :) 

  • July 11, 2016 4:56 PM CEST

    The new Android-App is available now. What about the iOS-App?

    • 310 posts
    June 30, 2016 5:18 PM CEST

    Hello Guys! 

    Sorry for the little silence from me these days. 

    We still need a bit more time, we thoguht the developing are finished, but we also found some bugs that we must have to repair. 

    We are working on make it available, but i also has to say, it takes us some more time. 

    Sorry, and thank you for your patience, 

    We are waiting for share it to you. :) 

    Regards, 

    Balint Mezei - SBrick Team 

  • June 30, 2016 9:10 AM CEST

    Hi Balint.

    Are there problems with the new iOS-App?

    • 3 posts
    June 29, 2016 10:16 PM CEST

    When is new release, I can't see it yet in app store?

    • 15 posts
    June 19, 2016 2:59 PM CEST

    [blockquote]Balint Mezei said:

    [blockquote]Lars Böhme said:

    Dear Support Team,

     

    I use the app on my Iphone 5 and it crashes when I want to start a profile. That started with an update of my private profile that contains a sequece. I did a firmware update and ensured the app is up to date as well.

    Please help me to get my model working.

    [/blockquote]


    Hello Lars! 

    The current IOS application doesen't support the clinometer and the sequence function yet. 

    Early next week, we will relesase the new application, which solve this issue, and you won't get more crash. :)

    I hope i could help to you. 

    We ask for some patience, 

    Regards, 

    Balint Mezei - SBrick Team 

    [/blockquote]

     

     

    Hey Balint, thats great news, can't wait for it!

    Thank you for the quick response during the weekend, nice service.

    Best regards, Larsn

    • 310 posts
    June 19, 2016 2:06 PM CEST

    [blockquote]Lars Böhme said:

    Dear Support Team,

     

    I use the app on my Iphone 5 and it crashes when I want to start a profile. That started with an update of my private profile that contains a sequece. I did a firmware update and ensured the app is up to date as well.

    Please help me to get my model working.

    [/blockquote]


    Hello Lars! 

    The current IOS application doesen't support the clinometer and the sequence function yet. 

    Early next week, we will relesase the new application, which solve this issue, and you won't get more crash. :)

    I hope i could help to you. 

    We ask for some patience, 

    Regards, 

    Balint Mezei - SBrick Team 

    • 15 posts
    June 19, 2016 1:19 PM CEST

    Dear Support Team,

     

    I use the app on my Iphone 5 and it crashes when I want to start a profile. That started with an update of my private profile that contains a sequece. I did a firmware update and ensured the app is up to date as well.

    Please help me to get my model working.


    This post was edited by Lars Böhme at June 19, 2016 1:28 PM CEST
    • 310 posts
    June 13, 2016 7:13 PM CEST

    [blockquote]Jonathan Hirtler said:

    Wuold it be possible to have a button to play audio files in the new ios app? I would imagine this would be relatively easy to implement. Would love to be able to upload a train horn or engine effects and play them from the phone.

    Looking forward to the sequences support in the new ios app! Keep up the good work.

    [/blockquote]

     

    Hello! 

    It sounds a great idea, thanks for the suggestion. 

    We check out what could we do. :) 

    Best wishes, 

    Balint Mezei - SBrick Team 


    This post was edited by Balint Mezei at June 13, 2016 7:13 PM CEST
  • June 13, 2016 1:18 AM CEST

    Wuold it be possible to have a button to play audio files in the new ios app? I would imagine this would be relatively easy to implement. Would love to be able to upload a train horn or engine effects and play them from the phone.

    Looking forward to the sequences support in the new ios app! Keep up the good work.

    • 310 posts
    June 10, 2016 4:27 PM CEST

    [blockquote]Troy Johnston said: Why does the Sbrick iOS app only show the Sbrick's temperature as 0.00 degrees Celsius? I have tried it with another iOS device and it seemed to work just fine. Any reasons why this is happening and a solution to the problem would be much appreciated. Thanks![/blockquote]


    Hello!

    The application only shows the temperature  with the newest firmware.

    Please try to update it.

    If the update doesen't work, please contact us at info@sbrick.com

    Regards,

    Balint Mezei - SBrick Team


    This post was edited by Balint Mezei at June 10, 2016 4:27 PM CEST
    • 4 posts
    June 10, 2016 3:45 PM CEST
    Why does the Sbrick iOS app only show the Sbrick's temperature as 0.00 degrees Celsius? I have tried it with another iOS device and it seemed to work just fine. Any reasons why this is happening and a solution to the problem would be much appreciated. Thanks!
    This post was edited by Tmoney Technic at June 10, 2016 3:46 PM CEST
    • 310 posts
    June 7, 2016 11:26 PM CEST

    [blockquote]Mirco Piatek said:

    Any news?

    I´m waiting for the update because of the "Sequences"

    [/blockquote]

    Hello!

    Tests are promising. :)

    The sequence part of the Profile Designer also changes, it will be more komplex. 

    If everything goes right, soon it will be available. 

    Regards, 

    Balint Mezei - SBrick Team 

  • June 7, 2016 4:40 PM CEST

    Any news?

    I´m waiting for the update because of the "Sequences"

    • 310 posts
    May 25, 2016 2:42 PM CEST

    [blockquote]Mirco Piatek said:

    Perfect...

    Any idea at what time the update will be available?

     

    [blockquote]Balint Mezei said:

    [blockquote]Mirco Piatek said:

    Hello.

    I didn´t read the full 13 pages here... Maybe my question is answered somewhere in the posts on these 13 pages...

    Shame on me. I ask it directly.

    What about the bug with the sequences in the iOS-App? Will this bug also be fixed with the next update?

     

    Thanks and best regards

    Mirco

    [/blockquote]

    Hello!

    Yes it will. :) In the new application sequence and clinometer will work pefectly. :)

    Regards, 

    Balint Mezei - SBrick Team 

    [/blockquote]

    [/blockquote]

    Developing is still in progress. :) 

    We do our best! :) 

    Regards, 

    Balint Mezei - SBrick Team 

  • May 25, 2016 1:16 PM CEST

    Perfect...

    Any idea at what time the update will be available?

     

    [blockquote]Balint Mezei said:

    [blockquote]Mirco Piatek said:

    Hello.

    I didn´t read the full 13 pages here... Maybe my question is answered somewhere in the posts on these 13 pages...

    Shame on me. I ask it directly.

    What about the bug with the sequences in the iOS-App? Will this bug also be fixed with the next update?

     

    Thanks and best regards

    Mirco

    [/blockquote]

    Hello!

    Yes it will. :) In the new application sequence and clinometer will work pefectly. :)

    Regards, 

    Balint Mezei - SBrick Team 

    [/blockquote]

  • May 25, 2016 1:04 PM CEST

    [blockquote]Balint Mezei said:

    [blockquote]Mirco Piatek said:

    Hello.

    I didn´t read the full 13 pages here... Maybe my question is answered somewhere in the posts on these 13 pages...

    Shame on me. I ask it directly.

    What about the bug with the sequences in the iOS-App? Will this bug also be fixed with the next update?

     

    Thanks and best regards

    Mirco

     

    ok but is it possible to have a date for the dispo of the new application for ios Thanks for your help

     

    [/blockquote]

    Hello!

    Yes it will. :) In the new application sequence and clinometer will work pefectly. :)

    Regards, 

    Balint Mezei - SBrick Team 

    [/blockquote]


    This post was edited by BERNARD KALFAYAN at May 25, 2016 1:07 PM CEST