Forums » Support

• NXT45 R.

  

  • 20 posts
   

  February 11, 2015 1:57 PM CET

  [blockquote]Conor Davies said:

  Thanks, NXT45R.

  As for the Auto-Reset...

  I don't want the slider to automatically return to the centre position because I want to be able to leave the motor running at whatever speed I choose. I do, however, want to be able to turn the motor 'OFF'. Using the slider does not actually turn the motor OFF, it just stops turning but it still receives a signal (and makes a horrible noise!).

  What I'd like is a RESET button, like in the Port Tester, which will turn OFF the motor completely (and, in an ideal world, reset the slider to zero).

  Thanks in advance for any guidance.

  Conor

  [/blockquote]

   

  Hi Conor I just made how-to video for what you wanted to do.

  https://www.youtube.com/watch?v=YkEJfSmiqHU

   

  
  This post was edited by NXT45 R. at February 11, 2015 4:06 PM CET
• Zsolt Szrapkó

  

  • 143 posts
   

  February 10, 2015 11:37 PM CET

  [blockquote]juerg siegenthaler said:

  It must be possible to link the Slider with a Button such as in Visual Basic.

  So that we can in the PD link the Slider with a Dropdown like the "AutoReset" to the Button

  [/blockquote]

  Yes, we want to achive functionality like what you said.

  
  This post was edited by Zsolt Szrapkó at February 10, 2015 11:38 PM CET
• Zsolt Szrapkó

  

  • 143 posts
   

  February 10, 2015 11:30 PM CET

  [blockquote]Conor Davies said:

  profile working again and new profiles visible from within app.

  thanks for whatever hard work you have been doing in the background.

   

  I tried assigning both a slider and a button to a single port, to try to achieve my goal of a non-auto-zero slider that could be reset (i.e. switched off) by using the button - just like the RESET button in the port tester.

  I failed :(

  I've tried a range of possible solutions (thanks NXT 45 R and others) but nothing seems to work.

  Since it is quite clearly possible to achieve this (just look at how the port tester does it), would it be possible to allow the same functionality in the Profile Designer, please?

  Thanks in advance.

  Conor

   

  PS should I be putting this request in a different part of the forum?

  [/blockquote]

  We want create some controls, and options like that in the near future, but currently it's not possible.

• juerg siegenthaler

  

  • 23 posts
   

  February 10, 2015 11:15 PM CET

  It must be possible to link the Slider with a Button such as in Visual Basic.

  So that we can in the PD link the Slider with a Dropdown like the "AutoReset" to the Button

  
  This post was edited by juerg siegenthaler at February 10, 2015 11:17 PM CET
• Fernando Correia

  

  • 57 posts
   

  February 10, 2015 10:28 PM CET

  Of course in code everything can be done! Like in the port tester. :)

  But comparing the port tester with the profile concept, is not quite the samething.

  While the port tester is just a single implementation, profile involve an architecture and concept design that must be well though, for it to work correctly and scale, if we think in terms of efective software development practices.

  If this is considered, of course it can be implemented. :)

   

  On a different note, the LEGO PF Speed Remote controller also has one reset button for each dialer, for a similar reason and more than that.

• juerg siegenthaler

  

  • 23 posts
   

  February 10, 2015 10:04 PM CET

  @Conor Davies    ......Crazy... the same Problem... Slider and one Stop Button for Stop the Slider

• Conor Davies

  

  • 21 posts
   

  February 10, 2015 9:50 PM CET

  profile working again and new profiles visible from within app.

  thanks for whatever hard work you have been doing in the background.

   

  I tried assigning both a slider and a button to a single port, to try to achieve my goal of a non-auto-zero slider that could be reset (i.e. switched off) by using the button - just like the RESET button in the port tester.

  I failed :(

  I've tried a range of possible solutions (thanks NXT 45 R and others) but nothing seems to work.

  Since it is quite clearly possible to achieve this (just look at how the port tester does it), would it be possible to allow the same functionality in the Profile Designer, please?

  Thanks in advance.

  Conor

   

  PS should I be putting this request in a different part of the forum?

• Tamás Fábián

  

  • 178 posts
   

  February 10, 2015 9:43 PM CET

  Thanks for the quick reports. :)

• Conor Davies

  

  • 21 posts
   

  February 10, 2015 9:41 PM CET

  profiles now appearing.

   

  many thanks.

   

  Will test and report back.

• Mark Singleton

  

  • 28 posts
   

  February 10, 2015 9:31 PM CET

  Working now :-) Thank you.

   

  IOS 8.1.3 App 3.6 (build 158)

• Tamás Fábián

  

  • 178 posts
   

  February 10, 2015 9:13 PM CET

  Nope.

  But this time really, I've reproduced and successfully tested with my droid.

• Tamás Fábián

  

  • 178 posts
   

  February 10, 2015 8:59 PM CET

  I probably have caught the bug, please check your appliactions.

• Jurgen Krooshoop

  

  • 23 posts
   

  February 10, 2015 8:23 PM CET

  Same problem over here: I just installed the latest version of the Android app, but my custom prifile is not showing up in the market.

  Using: Sony Z3 Compact, Android 4.4.4

  
  This post was edited by Jurgen Krooshoop at February 10, 2015 8:23 PM CET
• Conor Davies

  

  • 21 posts
   

  February 10, 2015 7:43 PM CET

  just tried to make a new profile in PD.

  New profile not appearing in marketplace on ipad/app.

  Thanks.

  COnor

   

  
  This post was edited by Conor Davies at February 10, 2015 7:53 PM CET
• Conor Davies

  

  • 21 posts
   

  February 10, 2015 7:34 PM CET

  nothing has changed for me. No profiles visible in app.

  Do I need to uninstall SBrick app and then re-install it vis TestFlight to pick up any changed that you have made?

  thanks

  Conor

   

  UPDATE:

  tried uninstalling then re-installing.

  app crashes when you log-in to marketplace.

  re-start app and you are logged in.

  Still no profiles appearing for me - even though they are clearly visible in Profile Designer and have only been edited since they were last used successfully after initial release of PD.

  Thanks for ongoing support.

  COnor

  
  This post was edited by Conor Davies at February 10, 2015 7:38 PM CET
• Tamás Fábián

  

  • 178 posts
   

  February 10, 2015 7:25 PM CET

  Hello Folks,

  an API update has just came out, please check your profiles again.

• Lénárd Pásztor

  

  • 340 posts
   

  February 10, 2015 6:29 PM CET

  Ok, It seems we catched the bug. Fixing now..

• juerg siegenthaler

  

  • 23 posts
   

  February 10, 2015 6:27 PM CET

  Yes
• Lénárd Pásztor

  

  • 340 posts
   

  February 10, 2015 6:25 PM CET

  Are you using JPG pictures in your profile?

• Conor Davies

  

  • 21 posts
   

  February 10, 2015 6:23 PM CET

  I am using SBrick (3.6, build 158) app via Testflight (ios 8.1.2, ipad Mini).

   

  thanks

• juerg siegenthaler

  

  • 23 posts
   

  February 10, 2015 6:11 PM CET

  Android 0.0.41
• Lénárd Pásztor

  

  • 340 posts
   

  February 10, 2015 5:57 PM CET

  Can you tell the app version that you have?

• Conor Davies

  

  • 21 posts
   

  February 10, 2015 5:47 PM CET

  need to go offline for a few hours.

  will try again later this evening and see if Lenard has been able to work out the problem here.

  Many thanks.

• Lénárd Pásztor

  

  • 340 posts
   

  February 10, 2015 5:39 PM CET

  ok, checking it NOW

• juerg siegenthaler

  

  • 23 posts
   

  February 10, 2015 5:33 PM CET

  Same problem as conor david